background image

1– EN

  ENGLISH

  ESPAÑOL

INFORMATION (For U.S.A.)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used 
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Caution

Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.

IMPORTANT FOR LASER PRODUCTS

1.  CLASS 1 LASER PRODUCT
2. 

CAUTION:

 Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified 

service personnel.

3. 

CAUTION:

 (For U.S.A.) 

Visible and/or invisible class II laser radiation when open. Do not stare into beam.

 

 

(For Canada)  Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical 

instruments.

4.  REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

KD-S15

CD RECEIVER: INSTRUCTIONS/INSTALLATION

GET0561-001A

[J]

0508DTSMDTJEIN

EN

© 2008 Victor Company of Japan, Limited

For customer Use:

Enter below the Model No. and Serial No. which 
are located on the top or bottom of the cabinet. 
Retain this information for future reference.

Model No.

Serial No.

To keep discs clean

Wipe in a straight line from center of disc to 
edge. Do not use liquid cleaners, thinners, or 
benzene.

To play new discs

Remove any rough areas from the inner and 
outer edges of the disc.

MAINTENANCE

How to clean the connectors

Wipe the connectors with 
a cotton swab or cloth 
moistened with alcohol.

Moisture condensation

Moisture may condense on the lens inside the unit. Eject 
the disc and leave the unit turned on for a few hours until 
the moisture has evaporated.

Do not use the following discs:

General

•  This unit has been designed to reproduce CDs/CD Texts, 

and CD-Rs (Recordable)/CD-RWs (Rewritable) in audio CD 
(CD-DA).

•  After ejecting a disc, “NO DISC” appears and you cannot 

operate some of the buttons. Insert another disc or press 
SRC to select another playback source.

Playing a CD-R or CD-RW

•  Use only “finalized” CD-Rs or CD-RWs.
•  This unit can play back multi-session discs; however, 

unclosed sessions will be skipped while playing.

•  Some CD-Rs or CD-RWs may not be played back on this 

unit:

  – Discs are dirty or scratched.
  – Moisture condensation has occurred on the lens inside 

the unit.

  – The pickup lens inside the unit is dirty.
  – The files on the CD-R/CD-RW are written using the 

“Packet Write” method.

  – There are improper recording conditions (missing data, 

etc.) or media conditions (stained, scratched, warped, 
etc.).

•  CD-RWs may require a longer readout time since the 

reflectance of CD-RWs is lower than that of regular CDs.

  Basic operations 

•  By pressing SRC on the unit, you can also turn on the 

power. If the source is ready, playback also starts.

•  If you turn off the power while listening to a disc, disc 

play will start from where it had been stopped previously 
next time you turn on the power.

•  When no disc is loaded in the unit, you cannot select “CD” 

as the playback source.

  Tuner operations

•  During SSM search...
  – All previously stored stations are erased and the 

stations are stored anew.

  – Received stations are preset in No. 1 (lowest 

frequency) to No. 6 (highest frequency). 

  – When SSM is over, the station stored in No. 1 will be 

automatically tuned in.

  Disc operations

Caution for DualDisc playback

•  The Non-DVD side of a “DualDisc” does not comply with 

the “Compact Disc Digital Audio” standard. Therefore, the 
use of Non-DVD side of a DualDisc on this product may 
not be recommended.

MORE ABOUT THIS UNIT

Warped disc

Sticker and sticker residue

Stick-on label

Detaching the control panel

Attaching the control panel

How to reset your unit

Reset the unit after installation is complete.

•  Your preset adjustments will also be erased.

How to forcibly eject a disc

•  Be careful not to drop the disc when it ejects.
•  If this does not work, reset your unit.

PREPARATIONS

Finish

Enter PSM menu.

Select an item.

Adjust.

Basic settings

Deactivate the display 
demonstration.

Adjust the hour.

Adjust the minute.

Cancel the display 
demonstration

Set the clock

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best 
possible performance from the unit.

Installation/connection are explained at the last section of this manual (reverse page, indicated with 

 symbol).

Unusual shape

Single CD—8 cm (3-3/16”) disc

[European Union only]

Connectors

C-thru Disc (semi-transparent disc)

Transparent or semi-transparent 
parts on its recording area

For safety...

•  Do not raise the volume level too much, as this will block 

outside sounds, making driving dangerous.

•  Stop the car before performing any complicated 

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold 
weather, wait until the temperature in the car becomes 
normal before operating the unit.

Warning

If you need to operate the unit while driving, be sure to 
look around carefully or you may be involved in a traffic 
accident.

Caution on volume setting

Discs produce very little noise compared with other sources. 
Lower the volume before playing a disc to avoid damaging 
the speakers by the sudden increase of the output level.

EN_KD-S15[J]_f.indd   1

EN_KD-S15[J]_f.indd   1

5/13/08   5:15:51 PM

5/13/08   5:15:51 PM

Содержание KD-S15

Страница 1: ...be skipped while playing Some CD Rs or CD RWs may not be played back on this unit Discs are dirty or scratched Moisture condensation has occurred on the lens inside the unit The pickup lens inside the unit is dirty The files on the CD R CD RW are written using the Packet Write method There are improper recording conditions missing data etc or media conditions stained scratched warped etc CD RWs ma...

Страница 2: ...briefly or attenuates the sound when power is on Turns the power off if pressed and held Changes the FM AM bands with 5 U Changes the preset stations with D Adjusts the volume level Selects the sound mode iEQ intelligent equalizer Selects the source Searches for stations if pressed briefly Fast forwards or reverses the track if pressed and held Changes the track of the disc if pressed briefly Sele...

Страница 3: ...approx 1 3 kg 2 9 lbs excluding accessories Designandspecificationsaresubjecttochangewithout notice If a kit is necessary for your car consult your telephone directory for the nearest car audio speciality shop SPECIFICATIONS INSTRUCTIONS Tuner section Frequency Range FM 87 5 MHz to 107 9 MHz with channel interval set to 100 kHz or 200 kHz 87 5 MHz to 108 0 MHz with channel interval set to 50 kHz A...

Страница 4: ...th black stripe Rear line out Rear ground terminal Antenna terminal Set L O MODE to WOOFER See General settings PSM You can also connect a subwoofer to the REAR LINE OUT terminals Rear speakers Remote lead Remote lead blue with white stripe To the remote lead of other equipment or automatic antenna if any Y connector 1 Front speakers Subwoofer Set L O MODE to REAR See General settings PSM You can ...

Отзывы: