ENGLISH
5
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
GETTING STARTED
For key layout on the faceplate, see page 3 or page 4.
Cancel the demonstration
When you turn on the power for the first time (or after you reset the unit),
the display shows:
KD-R691
/
KD-R491
:
“CANCEL DEMO” “PRESS ENTER”
1
Press
.
[YES]
is selected for the initial setup.
2
Press
again.
“DEMO
OFF”
appears.
KD-R499
/
KD-R494
/
KD-R492
:
“CANCEL DEMO” “PRESS” “VOLUME KNOB”
1
Press the volume knob.
[YES]
is selected for the initial setup.
2
Press the volume knob again.
“DEMO
OFF”
appears.
Set the clock and date
1
Press and hold
.
2
Perform ‘select an item
( 3
or
4)’
operation to select
[CLOCK]
.
3
Perform ‘select an item
( 3
or
4)’
operation to adjust the clock.
[CLOCK ADJUST]
set the hour and minute
[CLOCK FORMAT]
[12H]
or
[24H]
4
Perform ‘select an item
( 3
or
4)’
operation to set the date.
[DATE SET]
set the day, month and year
5
Press
to exit.
To return to the previous setting item, press
.
1
Set the basic settings
1
Press and hold
.
2
Perform 'select an item
( 3
or
4)’
operation to select an
item (see the following table).
3
Repeat step
2
until the desired item is selected or activated.
4
Press
to exit.
To return to the previous setting item, press
.
Default:
XX
SYSTEM
KEY BEEP
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
SOURCE SELECT
AM SRC
*
ON
: Enables AM in source selection. ;
OFF
: Disables.
( 6)
BUILT-IN AUX
*
ON
: Enables AUX in source selection. ;
OFF
: Disables.
( 8)
F/W UPDATE
UPDATE SYSTEM
F/W UP xxxx
YES
: Starts upgrading the firmware. ;
NO
: Cancels (upgrading is not
activated).
For details on how to update the firmware, see:
<http://www.jvc.net/cs/car/>.
*
Not displayed when the corresponding source is selected.
2
3
JS_JVC_KD_R691_E_EN_4.indd 5
JS_JVC_KD_R691_E_EN_4.indd 5
7/10/2017 2:42:02 PM
7/10/2017 2:42:02 PM
