13
Wiring connection
Signal cord
(not supplied)
Remote wire
(not supplied)
Rear ground terminal
Fuse (10 A)
To Blue/white
wire of the wiring
harness
D
Aerial terminal
JVC Amplifier
Part list for installation
( ×2 )
( ×1 )
( ×1 )
( ×1 )
( ×1 )
A
Faceplate
B
Mounting sleeve
C
Trim plate
D
Wiring harness
E
Extraction key
Rear/subwoofer output
IMPORTANT:
A custom wiring harness (separately
purchased) which is suitable for your car is
recommended for connection.
If your car has an ISO terminal
If your car does NOT have an ISO terminal
( or )
( or )
ISO connector
* Custom wiring harness (separately purchased)
For some VW/Audi or Opel (Vauxhall)
automobiles
You may need to modify the wiring of the supplied
power cord
D
as illustrated.
If the unit does not turn on with modified wiring 1,
use modified wiring 2 instead.
Y: Yellow
R: Red
Original wiring
Modified wiring 1
Modified wiring 2
B1 Purple
ª
Rear speaker
(right)
B2 Purple/black
·
B3 Gray
ª
Front speaker
(right)
B4 Gray/black
·
B5 White
ª
Front speaker
(left)
B6 White/black
·
B7 Green
ª
Rear speaker
(left)
B8 Green/black
·
A2 Brown: Mobile phone system
A4 Yellow: Battery
A5 Blue/white: Remote wire
A6
Orange/white: Car light control
switch
A7 Red: Ignition (ACC)
A8 Black: Earth (ground) connection
ENGLISH
Data Size:
A5 (210 mm x 148 mm)
Book Size:
B6 (182 mm x 128 mm)
EN_KD-R449[E]001A_1.indd 13
EN_KD-R449[E]001A_1.indd 13
3/19/13 2:32:54 PM
3/19/13 2:32:54 PM