Menu item
Selectable setting (Initial: [XX])
AUDIO
FADER
*5*6
R06 — F06
[00]
: Adjusts the front and rear speaker output balance.
BALANCE
*6
L06 — R06
[00]
: Adjusts the left and right speaker output balance.
LOUD
(Loudness)
ON
: Boosts low and high frequencies to produce a well-balanced sound at
a low volume level.
[OFF]
: Cancels.
VOL ADJUST
(Volume adjust)
-05 — +05
[00]
: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. (
“
VOL ADJ FIX
”
appears if
“
FM
”
is selected.)
L/O MODE
(Line output
mode)
Select if the REAR/SW terminals are used for connecting the speakers or
subwoofer (through an external amplifier).
SUB.W
: Subwoofer
[REAR]
: Speakers
SUB. W
*7
(Subwoofer)
OFF
: Cancels.
[ON]
: Turns on the subwoofer output.
SUB.W LPF
*8
(Subwoofer low-
pass filter)
LOW 55Hz
/
MID 85Hz
/
[HIGH 120Hz]
: Audio signals with frequencies
lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
SUB.W LEVEL
*8
(Subwoofer level)
00 — 08
[08]
: Adjusts the subwoofer output level.
HPF
*8
(High-pass filter)
ON
: Activates the High Pass Filter. Low frequency signals are cut off from
the front/rear speakers.
[OFF]
: Deactivates. (All signals are sent to the front/rear speakers.)
BEEP
(Keytouch tone)
[ON]
/
OFF
: Activates or deactivates the keypress tone.
TEL MUTING
*9
(Telephone
muting)
ON
: Mutes the sounds while using the cellular phone (not connected
through KS-BTA100).
[OFF]
: Cancels.
AMP GAIN
*10
(Amplifier gain)
LOW POWER
: VOLUME 00 — VOLUME 30 (Select if the maximum power of
each speaker is less than 50 W to prevent damaging the speakers.)
[HIGH POWER]
: VOLUME 00 — VOLUME 50
*5
If you are using a two-speaker system, set the fader level to “00”.
*6
This adjustment will not affect the subwoofer output.
*7
Displayed only when <L/O MODE> is set to <SUB.W>.
*8
Displayed only when <SUB.W> is set to <ON>.
*9
This setting does not work if <BT ADAPTER> is selected for <R-AUX> of <SRC SELECT>.
*10 The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER>
with the volume level set to higher than “VOLUME 30”.
Menu operations
ENGLISH
ޓ
|
13
2011/10/3
ޓ
19:21:12
KD-R531_E_EN
