16
Data Size:
B6L (182 mm x 128 mm)
Book Size:
B6L (182 mm x 128 mm)
Speaker output settings
Select the output setting for the speakers [
SPK/PRE OUT],
base on the
speaker connection method.
Connection via lineout terminals
For connections through an external amplifier. (
25
)
(For
KD-R670
)
Setting on
[
SPK/PRE OUT]
Audio signal through lineout terminal
FRONT
REAR/SW
REAR/REAR
Front speakers output
Rear speakers output
REAR/SUB.W
Front speakers output
Subwoofer output
SUB.W/SUB.W
Front speakers output
Subwoofer output
(For
KD-R570
/
KD-R470
/
KD-R370
)
Setting on
[
SPK/PRE OUT]
Audio signal through lineout terminal
REAR/SW
REAR/REAR
Rear speakers output
REAR/SUB.W
Subwoofer output
SUB.W/SUB.W
Subwoofer output
Connection via speaker leads
For connections without using an external amplifier. However, with this
settings you can also enjoy the subwoofer output. (
25
)
(For
KD-R670
/
KD-R570
/
KD-R470
/
KD-R370
)
Setting on
[
SPK/PRE OUT]
Audio signal through rear speaker lead
L (left)
R (right)
REAR/REAR
Rear speakers output
Rear speakers output
REAR/SUB.W
Rear speakers output
Rear speakers output
SUB.W/SUB.W
Subwoofer output
(Mute)
If [
SUB.W/SUB.W
] is selected:
– [
HIGH 120HZ
] is selected in [
SUB.W
LPF
] and [
THROUGH
] is not available.
– [
R01
] is selected in [
FADER
] and selectable range is [
R06
] to [
00
]
AUDIO SETTINGS
For
KD-R775S
HPF
OFF
: All signals are sent to the front/rear speakers. ;
LOW
100HZ
/
MID
120HZ
/
HIGH 150HZ
: Audio signals with frequencies lower than
100 Hz/ 120 Hz/ 150 Hz are cut off from the front/rear speakers.
FADER
R06
—
F06
(
00
): Adjusts the front and rear speaker output balance.
BALANCE
*
4
L06
—
R06
(
00
): Adjusts the left and right speaker output balance.
VOL
ADJUST
–15
—
+06
(
00
): Preset the initial volume level of each source
(compared to the FM volume level). Before adjustment, select the
source you want to adjust. (“VOL ADJ FIX” appears if FM is selected.)
AMP
GAIN
LOW
POWER
: Limits the maximum volume level to 25. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging
the speakers.) ;
HIGH POWER
: The maximum volume level is 35.
D.T.EXP
(Digital Track
Expander)
ON
: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost in
audio data compression. ;
OFF
: Cancels.
TEL
MUTING
*
5
ON
: Mutes the sounds while using the cellular phone (not connected
through KS-BTA100). ;
OFF
: Cancels.
For
KD-R670
/
KD-R570
/
KD-R470
/
KD-R370
SPK/PRE
OUT
Depending on the speaker connection method, select the appropriate
setting to get the desired output. (
Speaker output settings
)
*
4
This adjustment will not affect the subwoofer output.
*
5
Does not work if [
BT
ADAPTER
] is selected for [
AUX
] in [
SRC
SELECT
]. (
4
)
JS_JVC_KD_R775S_K_EN_7.indd 16
JS_JVC_KD_R775S_K_EN_7.indd 16
27/7/2015 3:21:56 PM
27/7/2015 3:21:56 PM