3 – EN
INSTRUCTIONS
Audio amplifier section
Maximum Power Output:
Front/Rear:
50 W per channel
Continuous Power Output (RMS):
Front/Rear:
19 W per channel into 4 Ω,
40 Hz to 20 000 Hz at no more
than 0.8% total harmonic
distortion.
Load Impedance:
4 Ω (4 Ω to 8 Ω allowance)
Tone Control Range:
Bass: ±12 dB at 100 Hz
Treble: ±12 dB at 10 kHz
Frequency Response:
40 Hz to 20 000 Hz
Line-Out Level/Impedance: 2.5 V/20 kΩ load (full scale)
Signal-to-Noise Ratio:
70 dB
Other Terminal:
AUX (auxiliary) input jack
Tuner section
Frequency Range:
FM:
87.5 MHz to 108.0 MHz
FM-LO: 65.00 MHz to 74.00 MHz
AM:
MW: 522 kHz to 1 620 kHz
LW: 144 kHz to 279 kHz
[FM Tuner]
Usable Sensitivity: 11.3 dBf (1.0 μV/75 Ω)
50 dB Quieting Sensitivity: 16.3 dBf (1.8 μV/75 Ω)
Alternate Channel Selectivity (400 kHz): 65 dB
Frequency Response: 40 Hz to 15 000 Hz
Stereo Separation: 30 dB
[MW Tuner]
Sensitivity/Selectivity: 20 μV/35 dB
[LW Tuner]
Sensitivity: 50 μV
SPECIFICATIONS
CD player section
Type:
Compact disc player
Signal Detection System:
Non-contact optical pickup
(semiconductor laser)
Number of channels:
2 channels (stereo)
Frequency Response:
5 Hz to 20 000 Hz
Dynamic Range:
93 dB
Signal-to-Noise Ratio:
98 dB
Wow and Flutter:
Less than measurable limit
MP3 Decoding Format: (MPEG1/2 Audio Layer 3)
Max. Bit Rate: 320 kbps
WMA (Windows Media® Audio) Decoding Format:
Max. Bit Rate: 192 kbps
General
Power Requirement:
Operating Voltage: DC 14.4 V
(11 V to 16 V allowance)
Grounding System:
Negative ground
Allowable Operating Temperature: 0°C to +40°C
Dimensions (W × H × D):
Installation Size (approx.):
182 mm × 52 mm × 160 mm
Panel Size (approx.):
188 mm × 58 mm × 13 mm
Mass (approx.):
1.3 k
g
(excluding accessories)
Design and specifications are subject to change without
notice.
• Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
TROUBLESHOOTING
Symptoms
Remedies/Causes
General
• Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
• Check the cords and connections.
• This unit does not work at all.
Reset the unit.
• “AUX IN” cannot be selected.
Check the “
SRC SELECT
”
=
“
AUX IN
” setting (see “Menu
operation”).
• Display appears dim.
Check the USER Color settings. (For KD-R37)
FM/AM
• SSM automatic presetting does not work.
Store stations manually.
• Static noise while listening to the radio.
Connect the aerial firmly.
• “AM” cannot be selected.
Check the “
SRC SELECT
”
=
“
AM
” setting (see “Menu
operation”).
Disc playback
• Disc cannot be played back.
Insert the disc correctly.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be
skipped.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which you used for
recording.
• Disc can be neither played back nor
ejected.
• Unlock the disc.
• Eject the disc forcibly.
• Disc sound is sometimes interrupted.
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
• “NO DISC” appears on the display.
Insert a playable disc into the loading slot.
• “PLEASE” and “EJECT” appear alternately
on the display.
Press
0
, then insert a disc correctly.
MP3/WMA playback
• Disc cannot be played back.
• Use a disc with MP3/WMA tracks recorded in a format compliant
with ISO 9660 Level 1, Level 2, Romeo, or Joliet.
• Add the extension code <.mp3> or <.wma> to the file names.
• Noise is generated.
Skip to another track or change the disc. (Do not add the extension
code <.mp3> or <.wma> to non-MP3 or WMA tracks.)
• A longer readout time is required
(“READING” keeps flashing on the display).
Do not use too many hierarchical levels and folders.
• Tracks are not played back in the order you
have intended.
Playback order is determined when the files are recorded.
• The elapsed playing time is not correct.
This sometimes occurs during playback. This is caused by how the
tracks are recorded on the disc.
• The correct characters are not displayed
(e.g. album name).
This unit can only display Roman letters (upper case), Cyrillic
alphabets (upper case), numbers, and a limited number of symbols.
Creating your own color—USER Color (For KD-R37)
You can create your own colors—“DAY COLOR” or “NIGHT COLOR.”
DAY COLOR: Used when “
DIMMER
” is set to “
DIMMER OFF
.”
NIGHT COLOR: Used when “
DIMMER
” is set to “
DIMMER ON
.”
Select “
COLOR
”
=
“
USER
.”
While “USER” is shown on the display...
Exit from the setting.
Menu operations
Menu items
Selectable settings
DEMO
DEMO
•
DEMO ON
: The display demonstration will be activated automatically if no operation is done
for about 20 seconds.
•
DEMO OFF
: Cancels.
CLOCK
CLOCK
DISP
*
1
•
CLOCK ON
: The clock time is shown on the display at all times when the power is turned off.
•
CLOCK OFF
: Cancels; pressing DISP will show the clock time for about 5 seconds when the
power is turned off.
CLOCK SET
: Adjust the hour, then the minute. [Initial: 0:00]
24H/12H
•
24 HOUR
•
12 HOUR
CLOCK ADJ
*
2
•
AUTO
: The built-in clock is automatically adjusted using the CT (clock time) data in the Radio
Data System signal.
•
OFF
: Cancels
EQ
EQ
: Select a preset sound mode suitable to the music genre.
USER, ROCK, CLASSIC, POPS, HIP HOP, JAZZ
DISPLAY
DIMMER
•
DIMMER ON
: Dims the display and button illumination.
•
DIMMER OFF
: Cancels.
SCROLL
*
3
•
SCROLL ONCE
: Scrolls the displayed information once.
•
SCROLL AUTO
: Repeats scrolling (at 5-second intervals).
•
SCROLL OFF
: Cancels.
Pressing DISP for more than one second can scroll the display regardless of the setting.
TAG DISPLAY
•
TAG ON
: Shows the Tag information while playing MP3/WMA tracks.
•
TAG OFF
: Cancels.
TUNER
AF-REG
*
4
•
AF ON
: When the currently received signals become weak, the unit switches to another station
(the programme may differ from the one currently received). (The AF indicator lights up.)
•
AF-REG ON
: When the currently received signals become weak, the unit switches to another
station broadcasting the same programme. (The AF and REG indicators light up.)
•
OFF
: Cancels.
PTY-
STANDBY
*
4
PTY OFF,
PTY codes: Activates PTY Standby Reception with one of the PTY codes. (Refer to “Radio
operations” on page 2 for PTY codes.)
TA VOLUME
*
4
VOLUME 00 – VOLUME 50
(or VOLUME 00 – VOLUME 30)
*
5
[Initial: VOLUME 15]
P-SEARCH
*
4
•
SEARCH ON
: Activates Programme Search.
•
SEARCH OFF
: Cancels.
MONO
*
6
•
MONO ON
: Activate monaural mode to improve FM reception, but stereo effect will be lost.
•
MONO OFF
: Restore the stereo effect.
IF BAND
•
AUTO
: Increases the tuner selectivity to reduce interference noises between adjacent stations.
(Stereo effect may be lost.)
•
WIDE
: Subject to interference noises from adjacent stations, but sound quality will not be
degraded and the stereo effect will remain.
COLOR
(For KD-R37)
COLOR 01
– COLOR 29,
USER
: Select one of the preset or user color for display and button (except
T/P
/
/
0
)
illumination. (See also “Creating your own color—USER color.”)
MENU COLOR
(For KD-R37)
MENU COLOR
•
OFF
: Cancels.
•
ON
: Changes the display and button (except
T/P
/
/
0
) illumination during menu, list
search and playback mode operations.
AUDIO
FADER
*
7
R06 – F06
: Adjust the front and rear speaker output balance. [Initial: 00]
BALANCE
L06 – R06
: Adjust the left and right speaker output balance. [Initial: 00]
LOUD
•
LOUD OFF
: Cancels.
•
LOUD ON
: Boost low and high frequencies to produce a well-balanced sound at a low volume
level.
AUX ADJUST
AUX ADJ 00 – AUX ADJ 05
: Adjust the auxiliary input level to avoid the sudden increase of the
output level when changing the source to external component connected to the AUX input jack
on the control panel.
BEEP
•
BEEP ON
: Activates the keypress tone.
•
BEEP OFF
: Deactivates the keypress tone.
TEL MUTING
•
MUTING OFF
: Cancels.
•
MUTING 1/MUTING 2
: Select either one which mutes the sounds while using a cellular phone.
AMP GAIN
*
8
•
HIGH POWER
: VOLUME 00 – VOLUME 50
•
LOW POWER
: VOLUME 00 – VOLUME 30 (Select if the maximum power of each speaker is less
than 50 W to prevent damaging the speaker.)
SRC SELECT
AM
*
9
•
AM OFF
: Disable “AM” in source selection.
•
AM ON
: Enable “AM” in source selection.
AUX IN
*
10
•
AUX OFF
: Disable “AUX IN” in source selection.
•
AUX ON
: Enable “AUX IN” in source selection.
*
1
If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select “
CLOCK
OFF
” to save the car’s battery.
*
2
Takes effect only when CT (clock time) data is received.
*
3
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*
4
Only for FM Radio Data System stations.
*
5
Depends on the amplifier gain control.
*
6
Displayed only when the source is “FM.”
*
7
If you are using a two-speaker system, set the fader level to “00.”
*
8
The volume level automatically changes to “VOLUME 30” if you change to “
LOW POWER
” with the volume level is set
higher than “VOLUME 30.”
*
9
Displayed only when any source other than “AM” is selected.
*
10
Displayed only when any source other than “AUX IN” is selected.
Repeat step 2 if necessary.
• To return to the previous menu, press
BACK.
Initial:
Underlined
Available characters on the display
Available characters
Display indications
1
2
3
Adjust the level (00 to 31) of the selected primary color.
4
Repeat steps
1
to
3
to adjust other primary colors.
EN_KD-R307_R37[EE]_f.indd 3
EN_KD-R307_R37[EE]_f.indd 3
18/9/08 2:48:28 PM
18/9/08 2:48:28 PM
