JVC KD PDR80 - Radio / CD, Инструкция по эксплуатации

Страница: 13 / 141

ENGLISH
13 EXTERNAL DEVICES
3
Repeat steps
1
and
2
until you finish
entering a PIN code.
4 Confirm the entry.
“Open...” flashes on the display.
6
Use the Bluetooth device to search and
connect.
On the device to be connected, enter the same
PIN code you have just entered for this unit.
“Connected (and device name)” appears on the
display.
Now connection is established and you can use the
device through the unit.
The device remains registered even after you
disconnect the device. Use “
Connect “ (or activate
“ Auto Connect ”) to connect the same device from
next time on. (See the following and page 32.)
Connecting a device
Perform steps 1 – 3 on the left column, then...
1
• Select “Search” to search for available
devices.
The unit searches and displays the list of the
available devices.
If no available device is detected, “Device Not
Found” appears.
• Select “Special” to connect a special device.
The unit displays the list of the preset devices.
2
Select a device you want to connect.
Registering using “Open”
Preparation: Operate the device to turn on its
Bluetooth function.
1
Select “BT-PHONE” or “BT-AUDIO.”
2
Select “New.”
3
Enter setting menu.
4
Select “Open.”
5
Enter a PIN (Personal Identification Number)
code to the unit.
• You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
• To enter a PIN code less than 4-digit, firstly
delete the initial PIN code (0000) by pressing
number button 5 (
).
*
Some devices have their own PIN code. Enter the
specified PIN code to the unit.
1
Move to the next (or previous) number
position.
2
Select a number or blank space.
Continued on the next page
EN08-13_KD-APD89[J]3.indd 13 EN08-13_KD-APD89[J]3.indd 13 11/29/07 2:20:26 PM 11/29/07 2:20:26 PM