30
ENGLISH
Basic procedure
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
Enter the PSM menu (see page 5).
2
Select a PSM item.
Ex.: When “Dimmer” is selected
General settings — PSM
3
Adjust the setting.
4
Repeat steps
2
and
3
to adjust the
other PSM items if necessary.
5
Finish the procedure.
Indications
Selectable settings, [reference page]
Demo/Link
Display
demonstration
Demo:
[Initial];
Display demonstration (animation) and
playback source indication appears alternately.
Image Link:
To show a still image while playing back an
MP3/WMA track, [13, 15, 42].
Off:
Cancels.
• These graphics appear if no operation is done for about 20 seconds.
Pict
Pictures
You can activate the graphic screen using either movie or picture, [29].
Picture:
[Initial];
One of your edited still images stored in
“Picture” is activated.
Movie:
Your edited animation stored in “Movie” is activated.
Slideshow:
Your edited still images stored in “Slide” are activated
and shown in sequence.
KeyIn CFM
Key-in confirmation
On:
[Initial];
An animation screen appears when you turn on or off the
power and select an i-EQ.
Off:
Cancels.
Opening
*
1
Opening screen
Default:
[Initial];
Factory-preset animation is used, [26].
User:
Your own user animation is used.
Ending
*
1
Ending screen
EN26-31_KD-LH915[U_UH]f.indd 30
EN26-31_KD-LH915[U_UH]f.indd 30
12/23/04 5:35:30 PM
12/23/04 5:35:30 PM