JVC KD-G737, Инструкция по эксплуатации

Страница: 25 / 117

ENGLISH
25 SETTINGS
Continued on the next page
General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table on pages 26 and 27.
1
Enter the PSM settings.
2
Select a PSM item.
3
Select or adjust the selected PSM item.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.
Adjusting the sound
1
2
Adjust the level.
BAS * 1 (bass)
Adjust the bass.
–06 to +06
MID * 1 (mid-range)
Adjust the mid-range frequencies
sound level.
–06 to +06
TRE * 1 (treble)
Adjust the treble.
–06 to +06
FAD
*
2 (fader)
Adjust the front and rear speaker
balance.
R06 to F06
BAL
*
3 (balance)
Adjust the left and right speaker
balance.
L06 to R06
LOUD *
1
(loudness)
Boost low and high frequencies to
produce a well-balanced sound at low
volume level.
LOUD ON or
LOUD OFF
SUB.W (subwoofer)
Adjust the subwoofer output level.
00 to 08,
initial: 04
VOL (volume)
Adjust the volume.
00 to 30
(or 50)
*
4
*
1 When you adjust the bass, mid-range, treble, or
loudness, the adjustment you have made is stored
for the currently selected sound mode (iEQ) including
“USER.”
* 2 If you are using a two-speaker system, set the fader
level to “00.”
* 3 The adjustment will not affect the subwoofer output.
*
4 Depending on the amplifier gain control setting. (See
page 27 for details.)
EN22-29_KD-G737_001A_pre.indd 25 EN22-29_KD-G737_001A_pre.indd 25 12/14/06 2:56:04 PM 12/14/06 2:56:04 PM