background image

16

Symptoms

Remedies/Causes

General

•  Sound cannot be heard from the speakers.

•  Adjust the volume to the optimum level.
•  Check the cords and connections.

•  The unit does not work at all.

Reset the unit (see page 2).

FM/AM

•  SSM automatic presetting does not work.

Store stations manually.

•  Static noise while listening to the radio.

Connect the antenna firmly.

Disc playback

•  Disc cannot be played back.

Insert the disc correctly.

•  CD-R/CD-RW cannot be played back.
•  Tracks on the CD-R/CD-RW cannot be 

skipped.

•  Insert a finalized CD-R/CD-RW.
•  Finalize the CD-R/CD-RW with the component which you 

used for recording.

•  Disc can neither be played back nor ejected.

•  Unlock the disc (see page 9).
•  Eject the disc forcibly (see page 2).

•  Disc sound is sometimes interrupted.

•  Stop playback while driving on rough roads.
•  Change the disc.
•  Check the cords and connections.

•  “NO DISC” appears on the display.
•  “PLEASE” and ”EJECT” appear alternately on 

the display.

Insert a playable disc into the loading slot.

MP3/WMA playback

•  Disc cannot be played back.

•  Use a disc with MP3/WMA tracks recorded in a format 

compliant with ISO 9660 Level 1, Level 2, Romeo, or 
Joliet.

•  Add the extension code <.mp3> or <.wma> to the file 

names.

•  Noise is generated.

Skip to another track or change the disc. (Do not add the 
extension code <.mp3> or <.wma> to non-MP3 or WMA 
tracks.)

•  A longer readout time is required 

(“READING” keeps flashing on the display).

Do not use too many hierarchical levels and folders. 

•  Tracks are not played back in the order you 

have intended.

The playback order is determined when the files are 
recorded.

•  The elapsed playing time is not correct.

This sometimes occurs during playback. This is caused by 
how the tracks are recorded on the disc.

•  The correct characters are not displayed (e.g. 

album name).

This unit can only display alphabets (upper case), 
numbers, and a limited number of symbols.

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.

EN14-17_KD-G396[UI]f.indd   16

EN14-17_KD-G396[UI]f.indd   16

1/15/08   11:25:02 AM

1/15/08   11:25:02 AM

Содержание KD-G396S



















Отзывы: