background image

1

  ESPAÑOL

IMPORTANT FOR LASER PRODUCTS

1.  CLASS 1 LASER PRODUCT
2. 

CAUTION:

 Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified 

service personnel.

3. 

CAUTION:

 Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.

4.  REPRODUCTION OF LABEL:  CAUTION LABEL, PLACED OUTSIDE THE UNIT.

KD-G246

CD RECEIVER: INSTRUCTIONS/INSTALLATION

GET0488-001A

[UG]

1107DTSMDTJEIN

EN

© 2007 Victor Company of Japan, Limited

Warning

If you need to operate the unit while driving, be sure to 
look around carefully or you may be involved in a traffic 
accident.

Caution on volume setting

Discs produce very little noise compared with other sources. 
Lower the volume before playing a disc to avoid damaging 
the speakers by the sudden increase of the output level.

General

•  This unit has been designed to reproduce CDs/CD Texts, 

and CD-Rs (Recordable)/CD-RWs (Rewritable) in audio CD 
(CD-DA) formats.

•  After ejecting a disc, “NO DISC” appears and you cannot 

operate some of the buttons. Insert another disc or press 
SRC to select another playback source.

Playing a CD-R or CD-RW

•  Use only “finalized” CD-Rs or CD-RWs.
•  This unit can play back multi-session discs; however, 

unclosed sessions will be skipped while playing.

•  Some CD-Rs or CD-RWs may not be played back on this 

unit:

  – Discs are dirty or scratched.
  – Moisture condensation has occurred on the lens inside 

the unit.

  – The pickup lens inside the unit is dirty.
  – The files on the CD-R/CD-RW are written using the 

“Packet Write” method.

  – There are improper recording conditions (missing data, 

etc.) or media conditions (stained, scratched, warped, 
etc.).

•  CD-RWs may require a longer readout time since the 

reflectance of CD-RWs is lower than that of regular CDs.

  Basic operations 

•  By pressing SRC on the unit, you can also turn on the 

power. If the source is ready, playback also starts.

•  If you turn off the power while listening to a disc, disc 

play will start from where it had been stopped previously 
next time you turn on the power.

•  When no disc is loaded in the unit, you cannot select “CD” 

as the playback source.

  Tuner operations

•  During SSM search...
  – All previously stored stations are erased and the 

stations are stored anew.

  – Received stations are preset in No. 1 (lowest 

frequency) to No. 6 (highest frequency).

  – When SSM is over, the station stored in No. 1 will be 

automatically tuned in.

  Disc operations

Caution for DualDisc playback

•  The Non-DVD side of a “DualDisc” does not comply with 

the “Compact Disc Digital Audio” standard. Therefore, the 
use of Non-DVD side of a DualDisc on this product may 
not be recommended.

MORE ABOUT THIS UNIT

For safety...

•  Do not raise the volume level too much, as this will block 

outside sounds, making driving dangerous.

•  Stop the car before performing any complicated 

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold 
weather, wait until the temperature in the car becomes 
normal before operating the unit.

Detaching the control panel

Attaching the control panel

How to reset your unit

Reset the unit after installation is complete.

•  Your preset adjustments will also be erased.

How to forcibly eject a disc

•  Be careful not to drop the disc when it ejects.
•  If this does not work, reset your unit.

PREPARATIONS

Finish

Enter PSM menu.

Select an item.

Adjust.

Basic settings

Deactivate the display 
demonstration.

Adjust the hour.

Adjust the minute.

Cancel the display 
demonstration

Set the clock

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best 
possible performance from the unit.

Installation/connection are explained at the last section of this manual (reverse page, indicated with 

 symbol).

[European Union only]

To keep discs clean

Wipe in a straight line from center of disc to edge. Do not 
use liquid cleaners, thinners, or benzene.

To play new discs

Remove any rough areas from the inner and outer edges of 
the disc.

MAINTENANCE

How to clean the connectors

Wipe the connectors with a cotton swab or cloth moistened 
with alcohol.

Moisture condensation

Moisture may condense on the lens inside the unit. Eject 
the disc and leave the unit turned on for a few hours until 
the moisture has evaporated.

Connectors

Do not use the following discs:

Single CD (8 cm disc)

Warped disc

Sticker and sticker residue

Stick-on label

Unusual shape

C-thru Disc (semi-transparent disc)

Transparent or semi-transparent 
parts on its recording area

EN_KD-G246[UG]_2.indd   1

EN_KD-G246[UG]_2.indd   1

10/24/07   9:01:18 AM

10/24/07   9:01:18 AM

Содержание KD-G246

Страница 1: ... are erased and the stations are stored anew Received stations are preset in No 1 lowest frequency to No 6 highest frequency When SSM is over the station stored in No 1 will be automatically tuned in Disc operations Caution for DualDisc playback The Non DVD side of a DualDisc does not comply with the Compact Disc Digital Audio standard Therefore the use of Non DVD side of a DualDisc on this produc...

Страница 2: ...icient signal strength Source display Track number Volume level indicator Time countdown indicator Main display time playback information EQ equalizer indicator Sound mode iEQ intelligent equalizer indicator LOUD loudness indicator Tr track indicator SETTINGS Select FM AM Select the bands Search for a station Auto Search Manual Search Hold either one of the buttons until M flashes on the display t...

Страница 3: ... Cancels SCROLL ONCE AUTO OFF Scrolls the displayed information once Repeats scrolling at 5 second intervals Cancels Pressing DISP for more than one second can scroll the display regardless of the setting AUX ADJ A ADJ 00 A ADJ 05 Adjust the auxiliary input level to avoid the sudden increase of the output level when changing the source from external component connected to the AUX input jack on the...

Страница 4: ...o install this unit correctly have it installed by a qualified technician Connect only the front speakers if your speaker system is two speaker system Before connecting Check the wiring in the vehicle carefully Incorrect connection may cause serious damage to this unit The leads of the power cord and those of the connector from the car body may be different in color 1 Cut the ISO connector 2 Conne...

Отзывы: