29
EXTERNAL DEVICES
Listening to the iPod/iPhone
Continued on the next page
You can connect the iPod/iPhone using the following cable or adapter:
To
Cable/adapter
To operate
Listen to the
music
USB 2.0 cable (accessory of the iPod/iPhone)
to the USB input terminal of the unit.
See “When connected with the USB cable” below.
Interface Adapter for iPod, KS-PD100 (not
supplied) to the CD changer jack on the rear
of the unit.
See “When connected with the interface adapter”
on page 33.
Watch the video USB Audio and Video cable for iPod/iPhone,
KS-U29 (not supplied) to the USB input
terminal of the unit.
See “When connected with the USB cable” below.
• Make sure <
AV ON
> is selected for <
AV IN
>,
see page 39.
• Turn on the monitor to watch the video.
• Disconnecting the iPod/iPhone will stop playback. Press SRC to listen to another playback source.
• For details, refer also to the manual supplied with your iPod/iPhone.
Caution:
• Avoid using the iPod/iPhone if it might hinder your safety while driving.
• Make sure all important data has been backed up to avoid losing the data.
When connected with the USB cable
There are 2 control modes in “
USB (iPod)
“ source.
• <
HEAD MODE
> : Control by this unit.
• <
IPOD MODE
> : Control by the connected iPod/iPhone.
Make sure <
AV ON
> is selected for <
AV IN
> when using KS-U29 to connect, see page 39.
Preparation
: Select the controlling terminal, <
HEAD MODE
> or <
IPOD MODE
> for iPod playback:
• Press and hold BACK button.
• Make the selection from <
IPOD SWITCH
> setting, see page 39.
EN26-35_KD-DV5506_001A_f.indd 29
EN26-35_KD-DV5506_001A_f.indd 29
2/24/09 3:10:32 PM
2/24/09 3:10:32 PM