JVC KD-DV4504, Инструкция по эксплуатации, Страница: 43 / 90

5 OPERATIONS
Basic operations
Using the control panel
w
• FM/AM : Search for station.
• DISC : Select chapter/track.
• CD-CH/IPOD : Select track.
e
Return to the previous menu.
r
Remote sensor
t
AUX (auxiliary) input jack
* 1
Also known as “Control dial” in this manual.
* 2
You cannot select these sources if they were disabled
in the Menu (see “
SRC SELECT
” in “Menu
operations” on page 27).
* 3
You cannot select these sources if they are not ready
or not connected.
* 4
You can still adjust the volume during pause when
the selected source is DISC.
Before resume playback, check to be sure that you
have not raise the volume level too much.
* 5
The current clock time is displayed if “
CLOCK
DISP
” is set to “
CLOCK OFF
” (see page 25).
Caution on volume setting
Discs produce very little noise compared with other
sources. Lower the volume before playing a disc to
avoid damaging the speakers by the sudden increase of
the output level.
1
• FM/AM : Select preset station.
• DISC : Select title/program/playlist/folder.
• CD-CH : Select folder.
• IPOD : Enter the main menu/Pause playback/
Confirm selection.
2
• Turn on the power.
• Attenuate the sound (if the power is on).
• Turn off the power [Hold].
3
Select the source.
FM
=
AM
* 2
=
DISC
* 3
=
CD-CH
* 3
/IPOD
* 3
(or EXT INPUT )
=
AUX IN
* 2
=
(back to the
beginning)
4
• Enter list operations.
• Enter Menu setting [Hold].
5
• Control the volume
* 4
or select items [Turn].
• Confirm the selection [Press].
• FM : Enter SSM preset mode [Hold].
• DISC : Pause/resume playback
* 4
[Press].
• DISC/CD-CH/IPOD : Enter playback mode [Hold].
6
Loading slot
7
Display window
8
Eject disc.
9
Select the sound mode.
p
Detach the panel.
q
• Change the display information (if the power is
turned on).
• Check the current clock time (if the power is
turned off).
* 5
Continued on the next page
EN02-09_DV4506_001A_f.indd 5 EN02-09_DV4506_001A_f.indd 5 12/2/08 4:27:36 PM 12/2/08 4:27:36 PM