JVC KD-DV4404 Скачать руководство пользователя страница 4

4

When connecting the external components, refer also to the manuals supplied for the components and 
adapter.

CAUTION:

  Before connecting the external components, make sure that the unit is turned off.

You can connect the following JVC components to the CD changer jack.

JVC component

Model name

CD changer (CD-CH)

CH-X1500, etc.

You can also connect the following components through the various JVC adapters.
•  Connection cords may need to be purchased separately.

Component

Adapter

Model name

iPod

Interface adapter for iPod

KS-PD100

Portable audio player with line input 
jacks

Line input adapter

KS-U57

Portable audio player with 3.5 mm 
stereo mini jack

AUX input adapter

KS-U58

D

E

Connecting the external amplifier

You can connect an amplifier to upgrade your car stereo system.
•  Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.

•  Disconnect the speakers from this unit, connect them to the amplifier. Leave the speaker leads of this unit unused.

Rear speakers

JVC Amplifier

Remote lead

Y-connector 

*

3

Remote lead (blue with white stripe)

To the remote lead of other equipment or automatic antenna if any

Front speakers

 

Required connections for DVD playback

Audio/video control amplifier or the decoder compatible with the 
multichannel digital sources

KV-MR9010

9-INCH WIDESCREEN MONITOR 

*

3

Digital optical cable 

*

3

Video cord 

*

3

*

3

  Not supplied for this unit.

*

4

  Signal cord (not supplied for this unit).

*

5

  Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint (if coated with paint, remove the paint before attaching the wire). Failure to do so may cause damage to the unit.

 

Connecting the external components

F

  iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

To disconnect the connector

Hold the connector tightly ( 

1

 ), then pull it out ( 

2

 ).

CD changer jack

CD-CH / KS-PD100 / 

KS-U57 / KS-U58

When connecting an external component

Instal3-4_DV4404[UI]_1.indd   4

Instal3-4_DV4404[UI]_1.indd   4

12/7/07   9:11:40 AM

12/7/07   9:11:40 AM

Содержание KD-DV4404

Страница 1: ...hassis again after installation Notes Replace the fuse with one of the specified rating If the fuse blows frequently consult your JVC car audio dealer It is recommended to connect speakers with a maximum power of more than 50 W both at the rear and at the front with an impedance of 4 Ω to 8 Ω If the maximum power is less than 50 W change AMP GAIN setting to prevent the speakers from being damaged ...

Страница 2: ...the 8 mm long screws If longer screws are used they could damage the unit Install the unit at an angle of less than 30 TROUBLESHOOTING The fuse blows Are the red and black leads connected correctly Power cannot be turned on Is the yellow lead connected No sound from the speakers Is the speaker output lead short circuited Sound is distorted Is the speaker output lead grounded Are the terminals of L...

Страница 3: ...w 2 Connect the antenna cord 3 Finally connect the wiring harness to the unit 15 A fuse Black Blue with white stripe Red Yellow 2 To metallic body or chassis of the car Ignition switch Fuse block To an accessory terminal in the fuse block To the remote lead of other equipment 200 mA max To a live terminal in the fuse block connecting to the car battery bypassing the ignition switch constant 12 V 1...

Страница 4: ...from this unit connect them to the amplifier Leave the speaker leads of this unit unused Rear speakers JVC Amplifier Remote lead Y connector 3 Remote lead blue with white stripe To the remote lead of other equipment or automatic antenna if any Front speakers Required connections for DVD playback Audio video control amplifier or the decoder compatible with the multichannel digital sources KV MR9010...

Отзывы: