.
<When installing on the left side>
<When installing on the right side>
.
70 mm
70 mm
150 mm
150 mm
Cable
Cable
Booster *
2
Booster *
2
Earth sheet *
1
Earth sheet *
1
Film aerial
A
Film aerial
A
Ceramic line (black part)
Front pillar
Front pillar
Recommended position
0
Be sure to check the installation position of film aerial
A
before installing. Film aerial cannot be re-
pasted.
0
Keep a minimum distance of 100
mm from the other aerials.
*1 Where the earth sheet can be pasted on the metal part of the front pillar.
*2 Do not paste the booster on the ceramic line (black part) around the windscreen because there is not
enough adhesion.
2
Check the installation position.
The following procedures are mainly for installing on the right side:
.
.
Cleaner
D
0
Wait until the surface of the windscreen is
completely dry before proceeding.
0
Warm the surface of the windscreen with the
defroster if it is cold, such as during winter.
3
Clean the windscreen with the cleaner
D
provided.
.
.
Sheet
䎬
0
Do not touch the sticky surface.
4
Remove the Sheet
I
horizontally and paste
the film aerial on the windscreen.
.
.
Sheet
䎬䎬
5
Remove the Sheet
II
vertically and paste the
film aerial on the windscreen slowly.
.
.
6
Rub the film aerial gently onto the
windscreen to allow it to stick firmly.
Installing the DAB aerial
4
|
ENGLISH