42
ENGLISH
Listening to the satellite radio
Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of
this unit.
•
JVC SIRIUS Satellite Radio System
, SC-C1 and KS-SRA100, PnP, SC-VDOC1 and KS-SRA100, for listening to the
SIRIUS Satellite Radio.
•
XM Satellite Radio System
, JVC Smart Digital Adapter–XMDJVC100, CNP2000UC and CNPJVC1 for listening to the
XM Satellite Radio.
For SIRIUS Radio
Activate your subscription after connection:
1
Turn on the power.
2
Select “Satellite Radio.”
The SIRIUS Satellite radio starts updating all the
SIRIUS channels. (
☞
“GCI update” column below.)
• Once completed, SIRIUS Satellite radio tunes in
to the preset channel, CH184.
3
Check your SIRIUS ID,
☞
page 54.
4
Contact SIRIUS on the internet at <http://
activate.siriusradio.com/> to activate your
subscription, or you can call SIRIUS toll-free at
1-888-539-SIRIUS (7474).
“Subscription updated Press any key to continue”
appears on the monitor once subscription has been
completed.
For XM Radio
Activate your subscription after connection:
• Only Channel 0, 1, and 247 are available before
activation.
1
Turn on the power.
2
Select “Satellite Radio.”
XM Tuner* starts updating all the XM channels.
“Channel 1” is tuned in automatically. (
☞
“GCI
update” column below.)
3
Check your XM Satellite radio ID labelled
on the casing of the XM Tuner, or tune in to
“Channel 0” (
☞
page 43).
4
Contact XM Satellite radio on the internet at
<http://xmradio.com/activation/> to activate
your subscription, or you can call 1-800-XM-
RADIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4 or higher).
*
XM Tuner: XMDirect ™ Tuner Box or XMDirect2 Tuner
System
GCI (Global Control Information) update:
• If channels are updated after subscription, updating starts automatically, and no sound can be heard.
For SIRIUS:
“Channel is updating XX% completed” appears.
For XM:
“UPDATING” appears.
• Update takes a few minutes to complete.
• Do not touch any touch pad control, press any button, or perform any operation until updating is completed.
EN_KDAVX40[J]3.indb 42
EN_KDAVX40[J]3.indb 42
08.12.25 6:31:13 PM
08.12.25 6:31:13 PM