1-20 (No.MA388<Rev.002>)
4.6
Service mode
Keep this state more than 2 seconds while
contimuing pressing the [SEL] button, [SOURCE]
button and [STANDBY/ON ATTENUATOR]
button sequentially.
The unit enters the service mode.
"INIT ALL" is
indicated on the LCD.
Press the [SEL] button
Press the [SEL] button
Press the [SEL] button
Press the [SEL] button
Press the [SEL] button
Press the [SEL] button
Initialize all data to the factory setting
:The system control EEPROM is
initialized entirely.
"VERSION" is
indicated on the LCD.
Micon version display
S-XXX-YY System control CPU
version/ROM correction version
DVD-XXX DVD version
*Exchanging it operate each indication with the
[DISC UP] button and [DISC DOWN] button.
"AREA/RGN" is
indicated on the LCD.
Distination area/region display
SYS-XX System control destination
DVD-AXX DVD unit destination
DVDRGN X DVD unit region
*Exchanging it operate each indication with the
[DISC UP] button and [DISC DOWN] button.
"VIDEO" is
indicated on the LCD.
Setting of NTSC or PAL
"NTSC" or "PAL" are indicated on the LCD.
*Exchanging it operate each indication with the
[DISC UP] button and [DISC DOWN] button.
Note:
There is the model that is not equipped with
this mode by a version.
"CLR ERR" is
indicated on the LCD.
Clear loading/ejection error history
:The error history stored in the EEPROM is cleared.
"CD ERROR" is
indicated on the LCD.
Read loading and ejection error history
:The error history saved in the system control
is read and displayed.
TOT-XXXX : Total error count.
(A figure between 0 and 9999 is
displayed. 10000 or more is also
displayed as 9999.)
Enyyzzzz : Latest three error history
n: Counter
yy: Error code
zzzz: Detailed error code