JVC KA-MR100G, Инструкция по эксплуатации

Страница: 12 / 20

9
Operation
To record video images of the camcorder using the memory
recorder, operate using the REC trigger button on the
camcorder. Each time a recording is started and stopped, a
clip is created in the SxS memory card.
Setting s Prior to Recording
Before recording, it is necessary to configure the camcorder
and memory recorder settings.
䡵
Camcorder s etting s
1
Set to the A CAM B mode u s ing the [CAM/VTR]
button
2
Set the [IEEE1 3 94] s witch to the A HDV B end
●
The memory recorder does not support the DV format.
3
Set the video format (e.g., 720/60p)
●
Set according to the video format settings of the memory
recorder.
Memo
:
●
The GY-HD200 (B) series camcorders can record in the
1080 format. Check the name plate on the camcorder.
4
Select a method for recording to the SxS
memory card
●
Select the method to record to the SxS memory card from
the [1394 REC TRIGGER] item of the OTHERS[2/2] menu
screen.
T
For details, please refer to the instruction manual of the
camcorder.
䡵
Memory recorder s etting s
For procedures to set the menu screen, refer to page 11.
1
Set the video format according to the camcorder
s etting
●
Set the RESOLUTION and FRAME/RATE under the
[SYSTEM] settings on the menu screen. (
A
Page 12)
2
Set the time code recording method for the SxS
memory card
●
Set the three items below on the [TC SET1] setting screen
of the menu screen. (
A
Page 12)
Set the preset time code and user bit values on the [TC
SET2] setting screen of the menu screen. (
A
Page 13)
Recording to the SxS Memory Card
●
When the memory recorder is in the play mode, press the
[STOP] button to stop playback.
●
There are three REC trigger buttons on the camcorder (on
the lens, at the side, and on the handle). The REC trigger
button to enable recording to the SxS memory card varies
according to the [1394 REC TRIGGER] settings.
●
A
A
TRIGGER TO HDV
B
message is shown on the
camcorder panel display when the REC trigger button is
pressed.
䡵
Hybrid recording with ca ss ette tape (when the
A
SYNCRO
B
s etting i s enabled)
For recording data to both the cassette tape of the
camcorder and the memory recorder.
1
Pre ss any one of the REC trigger button s on the
len s , at the s ide, or on the handle of the camcorder
to s tart recording to the SxS memory card
2
Pre ss the REC trigger button of the camcorder to
s witch between the recording and s tandby
mode s
3
Pre ss the [STOP] button on the memory recorder
to s top recording
Memo
:
●
When a cassette tape is not inserted into the camcorder,
data will only be recorded to the SxS memory card.
䡵
Recording only to the SxS memory card (when
the A SPLIT B s etting i s enabled)
For recording to the SxS memory card by pressing the REC
trigger button at the side of the camcorder.
1
Pre ss the REC trigger button at the s ide of the
camcorder to s tart recording to the SxS memory
card
2
Pre ss the REC trigger button of the camcorder to
s witch between the recording and s tandby mode s
3
Pre ss the [STOP] button on the memory recorder
to s top recording
䡵
Serie s recording (when the
A
SERIES
B
s etting i s
enabled)
Recording to the SxS memory card starts automatically
when the remaining capacity of the cassette tape falls below
three minutes.
1
Pre ss any one of the REC trigger button s on the
len s , at the s ide, or on the handle of the camcorder
to s tart recording to the ca ss ette tape
●
Recording to the SxS memory card starts automatically
when the remaining capacity of the cassette tape falls
below three minutes.
2
Pre ss the [STOP] button on the memory recorder
to s top recording
Memo
:
●
When there is no remaining space left on the SxS memory
card, a
A CARD FULL! B message will appear for about
three seconds.
Camcorder Panel Di s play
Recording Video Image s of
the Camcorder U s ing the
Memory Recorder
Setting Recording Method
OFF
Records only to the cassette tape of the
camcorder.
T
Data is not recorded in the SxS
memory card.
SYNCRO For hybrid recording
SPLIT Records only to the SxS memory card
SERIES For series recording
Setting item Description
TC SOURCE For setting the source of the time code
GENERATOR
For setting the run mode of the time code
generator of the memory recorder.
DROP
FRAME
For selecting either A NON DROP B or
A DROP B frame (enabled only when the
frame rate is set to 60 or 30.)
Remaining time
Memory recorder
When connected: White color
During recording: Red color
1394 REC TRIGGER mode
R: OFF
Y: SYNCRO
R: SPLIT F: SERIES
When connected: Red blinking
During recording: Red color
<Camcorder’s
STATUS 0 screen>
KA-MR100G_EN.book Page 9 Thursday, February 5, 2009 5:28 PM