13
Menu
Setting Item
Setting Value
s
Function
s
TC SET2
For presetting the time code generator of the memory recorder.
TC PRESET
(00:00:00:00)
_
23:59:59:29
or
(00:00:00:00)
_
23:59:59:24
The number of frames that can be specified are as shown below, depending on
the setting of the frame rate. (e.g., when the frame rate is 60, you can specify the
number of frames up to a value of 58.)
UB PRESET
(00:00:00:00)
_
FF FF FF FF
For presetting the user bit. (8 digits)
CLIP NAME
For specifying the first four characters of the clip name before recording, or
resetting the clip number.
●
An eight-digit clip name is automatically configured.
●
Serial numbers are automatically appended as the last four digits whenever a
clip is created. Serial numbers are automatically appended even when SxS
memory card is replaced or after changing the first four characters of the clip
name at
A
PREFIX
B
.
PREFIX
(Last three digit of the serial
K)
For specifying the first four characters of the clip name.
(Usable characters: A to Z, a to z, 0 to 9, -, _)
The default clip name is set as the “last three digits of the serial K”.
Example: If the serial number is 00001234, then the default clip name is 234K.
NUMBER
RESET
YES
NO
You can reset the clip number (0001) after changing the clip name at
A
PREFIX
B
.
If clips already exist on the SxS memory card, the smallest available number will
be used.
Example: If 0001 exists on the SxS memory card, then 0002 will be used.
YES : Reset clip number. (Press the [INFO/CLR] button.)
NO
: Do not reset clip number. (Press the [STOP] button.)
CLOCK1
For configuring settings related to the clock of the memory recorder.
TIME ZONE
UTC-12:00
_
(UTC-05:00)
_
UTC+14:00
For setting the time difference with the UTC (Universal Time Coordinate).
UTC Time Difference Chart by Region
When the setting of this item is altered, the [DATE]/[TIME] values below will be
automatically adjusted.
DATE
(--/--/--)
For setting the date (month/day/year). The last two digits of the western calendar
is used.
Press the [INFO/CLR] button to display the default setting.
TIME
(--:--:--)
For setting the time (hour:minute:second).
Press the [INFO/CLR] button to display the default setting.
CLOCK2
For setting the date or time display mode.
DATE STYLE
YY/MM/DD
(MM/DD/YY)
DD/MM/YY
For specifying the display style of the date.
●
Altering the setting of this item also changes the [DATE] display mode on the
[CLOCK1] setting screen.
YY/MM/DD : Year/Month/Day
MM/DD/YY : Month/Day/Year
DD/MM/YY : Day/Month/Year
TIME STYLE
12
(24)
For specifying the display style of the time.
●
Altering the setting of this item also changes the [TIME] display mode on the
[CLOCK1] setting screen.
12
: 12-hour display (AM/PM display)
24
: 24-hour display
MEDIA
For setting processes related to the SxS memory card.
FORMAT
YES
NO
Starts the formatting (initialization) of the SxS memory card.
●
When formatting is performed, all clips stored inside the SxS memory card will
be cleared.
YES : Format. (Press the [INFO/CLR] button.)
NO
: Do not format. (Press the [STOP] button.)
RESTORE
YES
NO
Scans the SxS memory card and makes attempts to restore damaged clips.
●
However, success of the restore process is not guaranteed.
YES : Execute. (Press the [INFO/CLR] button.)
NO
: Do not execute. (Press the [STOP] button.)
OTHER
For configuring settings related to the control buttons and menus of the memory
recorder.
OPERATION
(UNLOCK)
LOCK
You can disable the button control of the memory recorder to avoid misoperations
during shooting.
UNLOCK: Enables all buttons.
LOCK
: Button control is disabled, with the exception of the following.
●
Record/Standby (REC trigger button of the camcorder)
●
Menu screen display ([MENU] button)
●
Power On ([POWER] button)
ALL RESET
YES
NO
For resetting the menu settings of the memory recorder to the default values.
YES : Restore default settings. (Press the [INFO/CLR] button.)
NO
: Do not restore default settings. (Press the [STOP] button.)
Frame rate
60
50
30
25
24
Number of frames
58
48
29
24
23
KA-MR100G_EN.book Page 13 Thursday, February 5, 2009 5:28 PM
