19
Clear All
All channels are deleted from the channel memory.
1
Select “Channel”, then press
▶
or
ENTER
.
2
Press
▲
or
▼
to select “Add/Delete”, then press
▶
or
ENTER
.
3
Press
▲
or
▼
to select “Clear All”, then press
▶
or
ENTER
.
Add/Delete
>>
Add/Delete
Adding Channel
>>
: Select
ENTER:Set
Clear All
>>
Checking the digital
signal strength
This TV will allow you to view the digital signal
meter for digital channels.
1
Select “Channel”, then press
▶
or
ENTER
.
2
Press
▲
or
▼
to select “DTV Signal”.
3
Press
▶
or
ENTER
to
check the Digital signal
strength.
The Digital signal strength screen will appear.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Level
0 50
100
DTV Signal
NOTE:
Signal meter feature is not available for analog
channels.
After 240 seconds, DTV Signal screen will return to
normal TV-operation automatically.
•
•
Labeling channels
Channel label appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
You can choose any four characters to identify a
channel.
To create channel labels
1
Select “Channel”, then press
▶
or
ENTER
.
2
Press
▲
or
▼
to select “Ch Label”, then press
▶
or
ENTER
.
The Ch Label menu will appear.
3
Press
◀
or
▶
to select a channel you want to
label, then press
▼
.
Ch Label
Label Clear
>>
: Adjust
Ch Label
Channel Number
15-1
: Select
4
Press
◀
or
▶
repeatedly until the character you
want appears in the first space.
Label Clear
>>
: Adjust
Ch Label
Channel Number
15-1
: Select
Ch Label
A
ENTER:Set
The characters rotation as follows:
SPACE
-
, () @ / + =
-
If the character which you desire appears, press
ENTER
.
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
5
Repeat steps 3-4 for other channel. You can
assign a label to each channel.
6
When you finish inputting the label name, press
EXIT
to return to the normal screen.
To clear a Ch Label
After step 3 above, press
▲
or
▼
to select “Label
Clear”, then press
▶
or
ENTER
.
NOTE:
The channel labels will be reset after “Automatic
Search” on page 18.
Labeling video inputs
The Video Label feature allows you to label each
input source for your TV.
1
Select “Setup”, then press
▶
or
ENTER
.
2
Press
▲
or
▼
to select “Video Label”, then press
▶
or
ENTER
.
3
Press
▲
or
▼
to select an input which you want to
label.
4
Press
◀
or
▶
to select the desired label for that
input source.
Video2
-
Component
-
HDMI1
-
HDMI2
-
Video Label
: Adjust
: Select
Video1
-
–
: Uses the default label name
VCR
: Video cassette recorder
DVD
: DVD video
DTV
: Digital TV set-top box
SAT
:
Satellite
box
CBL
: Cable box
HD
: HDMI device (only for HDMI inputs)
•
ENGLISH
3CB0721A_En.indd 19
3CB0721A_En.indd 19
8/24/10 4:14:03 PM
8/24/10 4:14:03 PM
