JVC InteriArt LT-23C50BJ, Инструкция по эксплуатации

Страница: 21 / 33

ENGLISH - 20 -
4. Press the GREEN button to insert the chan-
nel to the chosen programme number.
Autostore:
To enter Autostore menu, press the BLUE but-
ton. To learn the features of this function see
" Autostore " below.
Autostore, searches and stores all channels
automatically on your TV, according to the
transmission of programme systems in your
area.
First of all choose the “ Country ” by using “ “
or “ ” button.
After Autostore is finalized, a programme list
will appear on the screen. In the program list
you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names of programmes, you can
change them in Programme menu.
Source Menu
You can switch your TV to EXT modes by
pressing directly to “ AV ” button or by selecting
in source menu from the main menu.
While in EXT mode, you can also switch your
TV to TV or other EXT modes by selecting in
source menu from the main menu.
In main menu, firstly use “ “ or “ ” button
then use “ “ / “ ” or “
OK ” button to enter
Source menu. In source menu, move the cur-
sor by “ “ or “ ” button and then press “ OK ”
button or “ “ / “ ” buttons when the cursor is
on the required item. The selected mode
comes automatically on the screen.
Other Features
TV Status
Programme Number , Programme Name (or
EXT ), (they are displayed on the upper left of
the screen). The sound indicator is displayed
with them too. They are displayed after
programme change during 3 seconds.
Sound Indicator
The alternatives of the indicator are Mono, Ste-
reo, Dual I and Dual II. This indicator is dis-
played under the programme number indica-
tor on the screen. " I-II " button is used to select
Mono or Stereo, or Dual I or Dual II.
0RQR
In Mono broadcast or in forced-mono (for ste-
reo broadcast).
6WHUHR
In Stereo broadcast.
'XDO,
If dual broadcast detected. Dual I is selected
in default and also can be selected after Dual
II by Remote Control.
'XDO,,
If Dual II selected by Remote Control.
Hyper Sound
By selecting Hyper Sound in sound menu or
by pressing the “
“ button on your remote
control, Pseudo/Spatial effect can be turned
on or off. In Mono transmission the left and
right channels will be added at left channel
and dummy stereo effect will introduced to
end-user.
In stereo transmission it yields a phase differ-
ence between left and right channels. Hyper
Sound selection will be displayed on the
screen when the TV Status button is pressed
or programme is changed.
JVC- LT-23C50BJ-50058107.p65 15.02.2005, 13:55 20