JVC InteriArt LT-20A56SJ, Инструкция по эксплуатации

Страница: 17 / 31

ENGLISH - 16 -
Setting Volume
• Press “ ” button to increase volume.
• Press “ ” button to decrease volume.
Or you can directly change the volume set-
tings using “
+ ” (to increase) or “ - ” (to
decrease) button.
Setting Bass Level
• Using “ ” or “ ” button select Bass Level.
• Press “ ” button to increase bass level.
• Press “ ” button to decrease bass level.
Setting Treble Level
• Using “ ” or “ ” button select Treble .
• Press “ ” button to increase treble level.
• Press “ ” button to decrease treble level.
Setting Balance
It allows adjusting the distribution between the
left and right speakers.
• Using “ ” or “ ” button select
Balance .
• Press “ ” button to change balance right-
ward.
• Press “ ” button to change balance leftward.
Hyper Sound
• Using “ ” or “ ” button select Hyper Sound.
• Pressing “ ” or “ ” button will turn this fea-
ture on or off.
Pseudo/spatial effect can be turned on or off
via the Hyper Sound item in the Sound menu
or by remote control. In Mono transmission
the left and right channels will be added at left
channel and dummy stereo effect will be in-
troduced to end-user. In stereo transmission
it yields a phase difference between left and
right channels.
To Store The Settings
In the Sound Menu, all settings are stored
automatically.
Feature Menu
By pressing “ ” or “ ” button, select the third
icon. Feature menu appears on the screen.
GRZQIRUIHDWXUHVHWWLQJV
/DQJXDJH
&KLOG/RFN
)HDWXUH
6OHHS7LPHU
2II
2II 2Q
(QJOLVK
%OXH%DFN 2II 2Q
Sleep Timer
The Sleep Timer is used to turn the TV off after
a defined period of time after selecting this
item. The timer can be programmed between
Off and 120 minutes in steps of 10 minutes.
(Off, 10, 20, 30, ... , 110, 120)
If the sleep timer is activated, it starts the
countdown for 60 seconds before the end of
the selected time. Then the TV goes
automatically to stand-by mode.
Child Lock
You can use this feature to prevent children
changing programmes or adjustments etc.
without remote control.
• Using “ ” or “ ” button select
Child Lock .
• Press “ ” / “ ” button to select Child Lock
On or Off .
When Off is selected, there will be no differ-
ence in the operation of your TV. When On is
selected, the TV can only be controlled by the
remote control handset. In this case the con-
trol panel buttons, except “ ” button, at the
right side of the TV will not work.
Selecting Menu Language
• Using “ ” or “ ” button select Language .
• Press “ ” or “ ” button to select menu lan-
guage.
Blue Back
You can set the TV to automatically change to
a blue screen if the signal is weak or absent,
or when there is no input from an external
device.
ENG-20710W-17MB18-1861UK-(LT-20A56SJ)-SIDE AV-10043999-5009XXXX.p65 26.09.2006, 17:13 16