JVC hr-xvs30ek, Инструкция по эксплуатации

Страница: 21 / 84

Masterpage:Right-No-Heading
21
Filename [XVS30EK_07S-VHS.fm]
Page 21 September 2, 2003 4:58 pm
Basic Recording
A
Load a cassette.
Insert a cassette with the record safety tab intact.
●
The unit’s power comes on automatically and the counter is
reset to 0:00:00.
B
Select the S-VHS deck.
On the unit
Press VCR/DVD repeatedly so that the VCR indicator
lights up.
On the remote control
Press VCR so that the VCR indicator lights up.
C
Choose a programme.
Press PR +/– or the number keys to select the channel
you wish to record.
D
Set the tape speed.
Press
p
. The current setting appears on the front
display panel or TV screen. Press
p
again to change
the setting while the tape speed is displayed on the TV
screen.
●
In EP mode, the recording time is extended three times.
●
If you record a programme in EP mode on the unit, it is
recommended to play back the EP-recorded tape on the unit.
E
Start recording.
Press and hold
7
and press
4
on the remote control, or
press
7
on the unit.
●
If “O.S.D.” is set to “ON” (
墌
pg. 65), “MARK” blinks on the
screen while an index code is being marked.
●
When “DIRECT REC” is set to “ON” (
墌
pg. 65), if you press
any button just after pressing
7
on the unit (or
7
and
4
on
the remote control), the unit may not function properly.
F
Pause/Resume recording.
Press
9
. Press
4
to resume recording.
●
You can select channel during the Record Pause mode.
G
Stop recording.
Press
8
. Then press
x
on the S-VHS deck to remove the
cassette.
●
Turn on the TV and select the video channel (or AV
mode).
●
Slide the TV/VCR/DVD switch to the right.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP (or EP) recording after inserting the cassette.
(
墌
pg. 23)
If “DIRECT REC” is set to “ON”, the programme that appears
on the TV screen will be recorded. (
墌
pg. 65)
Recording Resume Function
If there is a power outage during recording, Instant Timer
Recording or timer recording (
墌
pg. 21, 22, 26), the
recording will resume automatically when power is restored
to the unit unless the unit’s memory backup has expired.
Accidental erasure
prevention
To prevent accidental recording
on a recorded cassette, remove its
safety tab. To record on it later,
cover the hole with adhesive tape.
Record safety tab
XVS30EK_01.book Page 21 Tuesday, September 2, 2003 5:01 PM