Masterpage:Right-No-Heading
EN
19
Filename [XVS30EX_07S-VHS.fm]
Page 19
September 1, 2003 12:30 pm
Playback Features
Still Picture/Frame-By-Frame
Playback
1
Pause during playback.
Press
9
.
●
If there is vertical jitter, press
PR +/–
on the remote control to
correct the picture.
2
Activate frame-by-frame playback.
Press
9
.
Slow Motion
During still picture, press and hold
9
for 2 seconds, then
release. Press
9
and release again to return to still
picture.
●
The speed changes for each direction by pressing
3
and
5
repeatedly.
NOTE:
During slow motion playback, some noise may appear on the TV
screen. Press
PR +
or
–
on the remote control to eliminate the
noises.
Variable Speed Search
During playback, press
5
for forward variable speed
search, or
3
for reverse variable speed search.
●
The speed changes for each direction by pressing
3
and
5
repeatedly.
When pressing
5
: +5x
{
+7x
When pressing
3
: –1x
]
–5x
{
–7x
(Once
3
is pressed, reverse search starts in –1x normal
playback speed. After this process, each press of
3
changes
the search speed between –5x and –7x.)
NOTE:
The search speed changes in the same way for SP, LP and EP
mode.
Skip Search
During playback, press
1 to 6 times to skip over
unwanted sections.
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
Index Search
Your unit automatically marks index codes at the beginning of
each recording. This function gives you quick access to any one
of 9 index codes in either direction.
NOTE:
Before starting, make sure the unit is in the Stop mode.
Activate Index Search.
Press
2
or
6
. “
2
1” or “
6
1” is displayed on
the TV screen and search begins in the corresponding
direction.
●
To access index codes 2
through 9, press
2
or
6
repeatedly until the
correct index number is
displayed.
Example:
To locate the beginning of B
from the current position,
press
2
twice.
To locate the beginning of
D from the current position, press
6
once.
●
When the specified index code is located, playback begins
automatically.
Next Function Memory
The Next Function Memory “tells” the unit what to do after
rewinding. Before continuing, make sure the unit is in the Stop
mode.
a-
For Automatic Start Of Playback
Press
3
, then press
4
within 2 seconds.
b-
For Automatic Power Off
Press
3
, then press
1
within 2 seconds.
c-
For Automatic Timer Standby
Press
3
, then press
#
within 2 seconds.
d-
For Automatic Cassette Ejection After Tape Rewind
Press
3
, then press
x
within 2 seconds.
●
Turn on the TV and select the video channel (or AV
mode).
●
Slide the
TV/VCR/DVD
switch to the right.
ATTENTION
In the search, still, slow-motion or frame-by-frame playback
mode,
●
the picture will be distorted.
●
the noise bars will appear.
●
there may be a loss of colour.
●
you cannot hear the sound.
To resume normal playback, press
4
.
To resume normal playback during a Skip Search,
press
4
.
Current position
Index number
XVS30EX_01.book Page 19 Monday, September 1, 2003 12:31 PM
