Timer-Link mode: Deactivate
Timer-Link Recording
Note: Timer-Link works by using the timer function of
most Cable/Satellite Boxes. Please check
whether your current box has a "Timer" function.
Note: Timer-Link doesn't work, if Cable/Satellite Box
keeps a "Screen Saver" in "Power Off".
If so, please use "Manual Timer Programming"
Note: If the Timer-Link "On",
"TIMER/TIMER LINK" indicator
blinks on the JVC deck's
display window.
1
Set Up Timer
of Cable/Satellite Box
2
Power Off
Cable/Satellite Box
3
Power Off
HR-XVC14B/15S
after set record speed.
4
(Front of Unit)
(Front of Unit)
Hold "REC" Button
for 3 seconds
1. When your Cable/Satellite Box is powered on by t
he timer function, HR-XVC14B/15S is
also powered on and starts to record (It takes about 1 seconds) automatically.
2. When your Cable/Satellite Box is powered off using the timer function, HR-XVC14B/15S
also stops recording (It takes about 3 seconds) and then powers off automatically.
5
Power On
HR-XVC14B/15S
This operation makes "Timer-
Link" been off after finishing
Timer-Link record. If you keep
"Timer-Link" on, you don't need
this step.
Check! VHS
Tape Inserted!!
INSTRUCTIONS
pg. 21
*