Masterpage:Right-No-Heading
EN
29
Filename [XV3AS_07S-VHS.fm]
Page 29
February 12, 2004 2:59 pm
Express Timer
Programming
If you do not know the G-
CODE
number for the programme you
wish to record, use the following procedure to set your unit to
timer-record the programme.
Example: To timer-record the programme from 21:00 to
22:00 on 25th December, on channel 1.
A
Select the VHS deck.
On the unit
Press
VCR/DVD
repeatedly so that the VCR indicator
lights up.
On the remote control
Press
VCR
so that the VCR indicator lights up.
B
Access the G-
CODE
/S
HOW
V
IEW
screen.
Press
PROG
.
C
Access the Programme screen.
D
Enter the programme start time.
E
Enter the programme stop time.
Press
STOP +/–
to enter the time you want recording to
stop.
●
Press and hold
STOP +/–
to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
F
Enter the programme date.
Press
DATE +/–
.
●
The current date appears on the TV screen. The date you enter
appears in its place.
G
Enter the channel position.
H
Set the tape speed.
Press
p
(SP/LP or EP*)
.
* EP is for NTSC only.
I
Return to the normal screen.
Press
PROG
or
OK
. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears. If “PROGRAM OVERLAPPED” appears
on the screen, see page 28.
●
Repeat steps
B
–
I
for each additional programme.
J
Engage the unit’s timer mode.
Press
#
. The unit turns off automatically and “
#
”
appears on the front display panel.
●
To disengage the timer mode, press
#
again.
Before performing Express Timer Programming:
●
Make sure that the unit’s built-in clock is set properly.
●
Insert a cassette with the safety tab in place. The unit will
come on automatically.
●
Turn on the TV and select the video channel (or AV mode).
●
Slide the
TV/VCR/DVD
switch to the right.
●
Select the appropriate colour system with “PAL/
MESECAM” and “NTSC” (
墌
pg. 66).
Press
START +/–
. (If you’re
just starting out, “P1”
appears.)
Press
START +/–
to enter the
time you want recording to
start.
●
Press and hold
START +/–
to
move in 30-minute
increments, or press and
release repeatedly to move 1
minute at a time.
Press
PR +/–
.
XV3AS_01.book Page 29 Thursday, February 12, 2004 4:00 PM
