Masterpage:Right-No-Heading
EN
27
Filename [XV3AA_07S-VHS.fm]
Page 27
February 12, 2004 2:20 pm
F
Return to the normal screen.
Press
PROG
or
OK
. “PROGRAM COMPLETED” appears
on the TV screen for about 5 seconds, then the normal
screen appears. If “PROGRAM OVERLAPPED” appears
on the TV screen, see page 28.
●
Repeat steps
B
–
F
for each additional programme.
G
Engage the unit’s timer mode.
Press
#
. The unit turns off automatically and “
#
”
appears on the front display panel.
●
To disengage the timer mode, press
#
again.
NOTES:
●
To Change The Stop Time:
— press
STOP +/–
after pressing
OK
in step
D
. You can
compensate for anticipated programme schedule delays.
●
To Timer-Record Weekly Or Daily Serials:
— after pressing
OK
in step
D
, press
WEEKLY
(
number key
“9”
) for weekly serials or
DAILY
(
number key “8”
) for daily
serials (Monday — Friday). Either “WEEKLY” or “DAILY”
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
●
You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a
ninth, “PROGRAM FULL” appears on the TV screen and
“FULL” appears on the front display panel. To record the extra
programme, you must first cancel any unnecessary
programmes. (
墌
pg. 29)
ATTENTION
Guide Program Number Set
“G-
CODE
™/S
HOW
V
IEW
™
SETUP” appears
afterperforming step
D
if the
Guide Program number for
the G-
CODE
number you
entered has not been set.
Press
rt
or the
number keys
to input the channel position
number on which your unit
receives that station, then
press
OK
or
e
to set the Guide Program number. The
G-
CODE
Program screen appears.
G-CODE/SHOWVIEW SETUP
GUIDE PROG
TV PROG
[0-9] OR [ / ]:SELECT
[PROG] : EXIT
2
– –
XV3AA_01.book Page 27 Thursday, February 12, 2004 2:33 PM
