JVC HR-XV28SEF, Руководство по обслуживанию

Страница: 13 / 131

(No.YD068)1-13
2. Disassembly of Plate Top (Fig. A-2-1)
1) Separate the right part while leaning back the (B) part of
the plate top toward the arrow direction.
2) Separate the left part while leaning back the (B f) part of
the plate top toward the arrow direction.
(Tool used: Tool such as (-) driver, auger, etc with pointed
or flat end)
3. Holder Assembly CST (Fig. A-2-2)
1) Firstly separate the left part from the groove on the (D)
part of chassis while moving the holder assembly CST
toward the arrow direction.
Assemble by inserting the left part after firstly inserting the
(E) part of the holder assembly CST into the groove on the
(E') part of chassis.
2) Separate the right part from each groove of chassis
5. Opener Door (Fig. A-2-4)
1) Separate the opener door ahead from the guide hole of
chassis while turning it clockwise.
7. Lever Assembly S/W (Fig. A-2-6)
1) Separate the lever assembly S/W while pushing it toward
the arrow direction after removing the hook (4) on the left
side of chassis.
6. Arm Assembly F/L (Fig. A-2-5)
1) Firstly separate the left part of the arm assembly F/L from
the groove of chassis while pushing the arm assembly F/L
toward the arrow direction.
2) Separate the right part from the groove of chassis.).
4. Disassembly of Gear Assembly
Rack F/L (Fig. A-2-3)
1) Separate the hook (H3) while leaning ahead the hook (3)
after moving the gear assembly rack F/L toward the arrow
(A)
direction.
2) Separate the gear assembly rack F/L toward the arrow (B)
direction.
CAUTIONS
CAUTIONS
CAUTIONS
(B')
(C')
(C)
(B)
(D)
Holder Assembly CST Chassis
Chassis
Gear Rack F/L
Gear Drive
Assemble while pressing the (C), (C') part after correspond-
ing them as in drawing. For the assembly, correspond the gear part of gear assembly
rack F/L to the gear drive.
(H4)