34
VCR Plus+
Timer
Programming
1
2
4
5
3
6
8
0
7
9
2
2
q
5
/
8
6
MENU
OK
OK
MENU
NUMBER
NUMBER "9"
NUMBER "8"
TV/VIDEO
CANCEL
TIMER RECORDING
Enter Program Information
VCR PLUS+
PRESS NUMBER KEY(0-9)
PRESS (MENU) TO MAIN MENU
Before VCR Plus+ Timer programming, see "VCR Plus+
Setup" on page 19.
LOAD A CASSETTE
1
Make sure the record safety tab is present.
●
The VCR’s power comes on automatically.
●
If you’re watching on channel 3 or 4, press TV/VIDEO
to select the VIDEO mode. VIDEO is displayed on the
front display panel.
ACCESS VCR PLUS+ SCREEN
2
Press MENU.
●
The clock must be set in
order to access the VCR
Plus+ screen. If you
haven’t set the clock, the
Main Menu screen
appears when you press
MENU. Refer to page 7
for the Dual Quick Set procedure or page 8 for the
clock setting procedure.
ENTER PLUSCODE NUMBER
3
Press the appropriate
NUMBER keys to enter the
PlusCode number printed
in the TV listings for the
TV program you wish to
record, then press OK. The
Program screen appears.
●
To make corrections,
press CANCEL and input the correct PlusCode number.
●
If the PlusCode number you input is incorrect,
"ERROR" may appear on the screen to advise you of
the error. This happens when the PlusCode number is
for a program which has already passed. "ERROR" is
displayed for about 4 seconds and the VCR Plus+
screen reappears (step 2).
CHECK INPUT DATA
4
The PlusCode number you entered appears in the
Program screen. Check to make sure it’s accurate.
●
To timer-record daily or weekly serials, press DAILY
(NUMBER “8”) or WEEKLY (NUMBER “9”). “DAILY”
or “WEEKLY” appears on the Program screen.
●
If you made a mistake, press CANCEL and, after
pressing MENU as many times as necessary to access
the VCR Plus+ screen, input the correct PlusCode
number.
PROGRAM 1
(VCR PLUS+ 12345678)
DATE
7/10 FRI
START
8:00 PM
STOP
9:00 PM
CHANNEL
8 SP
PRESS (8=DAILY, 9=WEEKLY
SP/EP=REC SPEED)
PRESS (MENU) TO END
