38
EN
PLAYBACK AND RECORDING FEATURES (cont.)
Speed
Names of
special-effects
playback
Reverse
Forward
Search
Play
Slow-Motion
Still*
Slow-Motion
Play
Search
(Pro-Slow)**
(Pro-Slow)**
-7x -5x
-3x
-1x
-1/2x
-1/3x
0
1/3x
1/2x
1x
1.5x 2x 3x 5x 7x
Audio is output.
Audio is
Audio is
Audio is
Audio is output.
not output.
output.
output.
TimeScan
Audio output
*
* Still mode cannot be engaged using the
TIME SCAN
buttons. Still mode can only be engaged by pressing
the
PAUSE
button.
** Smooth slow motion delivering an uninterrupted moving image without distortion.
●
When the Superimpose function is "ON", the speed is displayed on the upper right corner of the TV screen for approx. 5 seconds.
●
The TimeScan search speed is the same for SP and EP recordings.
●
To resume normal playback, press
PLAY
.
●
When using the VCR's
TIME SCAN SHUTTLE
ring, the playback speed may not change depending on how far it is turned.
●
When using the VCR's
TIME SCAN SHUTTLE
ring, the playback speed will change up to 7
×
and –7
×
search speeds. Turning
the
TIME SCAN SHUTTLE
ring further will not increase the search speed.
●
Picture may be distorted at the position where the recording speed is switched.
●
The picture may be noisy for a moment when you change the playback speed.
●
During high-speed search with a tape containing both SP and EP recordings, the search speed will change automatically to 7x
normal playback speed with TimeScan when the recording tape speed switches from EP to SP.
●
Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.
●
Picture may appear distorted in comparison to normal playback.
●
In TimeScan mode there will be a time lag between the video and the audio, and noise may appear in the audio signal.
●
TimeScan sound quality will differ in comparison to normal playback.
●
When material such as music videos where there is non-stop sound (very few breaks in the soundtrack) are viewed at 2x
normal speed, the audio playback may be faster than normal.
●
When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.
●
±1/3x slow-motion playback is possible with SP recordings only.
●
Depending on the type of tape contents, the sound may not be clear during forward slow-motion playback.
●
Pro-Slow cannot be activated by pressing
PAUSE
for longer than 2 seconds.
●
Depending on the type of tape in use, noise may appear during Pro-Slow. When this happens, try manual tracking (
Z
pg. 26).
●
The operations by the remote control's
JOG
dial/
SHUTTLE
ring do not include TimeScan; noise will appear on the screen and
audio will not be output.
If you don't want to hear TimeScan audio, set "TIMESCAN AUDIO" to "OFF".
TimeScan Audio
The audio output can be set ON/OFF during TimeScan. Select ON/OFF as required. *The default setting is "ON".
1
Press
MENU
to access the Main Menu screen.
2
Move the highlight bar (arrow) to "FUNCTION SET" by press-
ing
CH
5∞
or
TIME SCAN
%fi
, then press
OK
or
TIME SCAN
.
3
Move the highlight bar (arrow) to "TIMESCAN AUDIO" by
pressing
CH
5∞
or
TIME SCAN
%fi
, then press
OK
or
TIME
SCAN
to select to "ON" or "OFF".
4
Press
MENU
to return to the normal screen.
%
PREVIOUS PAGE
VIDEO STABILIZER
OFF
2ND AUDIO RECORD
OFF
AUDIO MONITOR
HI-FI
S-VHS MODE
ON
AV COMPU-LINK
ON
=
TIMESCAN AUDIO
ON
NEXT PAGE
SELECT WITH (
5
,
∞
) AND (OK)
PRESS (MENU) TO END
%
FUNCTION
=
VIDEO CALIBRATION
ON
PICTURE CONTROL
AUTO
AUTO TIMER
OFF
SUPERIMPOSE
ON
AUTO SP
=
EP TIMER
OFF
DIGITAL R3
ON
NEXT PAGE
SELECT WITH (
5
,
∞
) AND (OK)
PRESS (MENU) TO END
