JVC HR-S9500E Скачать руководство пользователя страница 24

Страница: 24 / 76

PLAYBACK AND RECORDING FEATURES

Playback

Features

SKIP SEARCH

REVIEW

PLAY

REW

PAUSE

REW

Still Picture/Frame-By-Frame

Playback

PAUSE DURING PLAYBACK

Press

PAUSE

●

During still picture, the normal (mono) sound from
the previous 3 seconds (approx.) will be played back
repeatedly (provided there was at least 6 seconds of
normal playback prior to engaging the still picture
mode).

●

"TIMESCAN AUDIO" must be set to "ON", or the
sound will not be heard (

pg. 39).

ACTIVATE FRAME-BY-

FRAME PLAYBACK

Press

PAUSE

repeatedly to advance one frame at a time.

Press

TIME SCAN

repeatedly for forward frame-by-

frame playback or

TIME SCAN

™

repeatedly for

reverse frame-by-frame playback.

To resume normal playback, press

PLAY

Slow Motion (Pro-Slow*)/

Reverse Slow Motion/Re-

verse Motion Playback

* Smooth slow motion delivering an uninterrupted moving

image without distortion.

ACTIVATE SLOW-MOTION

PLAYBACK

For hands-free slow-motion, press

TIME SCAN

™

during playback to decrease speed in the forward
direction. Continue to press

TIME SCAN

™

to select

the reverse slow motion, reverse play and reverse
search modes.

During still picture, press and hold

TIME SCAN

for

forward slow motion, or press and hold

TIME SCAN

™

for reverse slow motion. Release to return to still picture.

To resume normal playback, press

PLAY

Refer to the chart on page 39 for the Play, Slow Motion and
Search speeds that are selected using the

TIME SCAN

buttons.

NOTE:

For short searches, during playback or still, press and hold

REW

for over 2 seconds. When released, normal playback resumes.

ACTIVATE HIGH-SPEED SEARCH

During playback or still, press

for forward high-speed

search, or

REW

for reverse high-speed search.

●

The search speed is 7 times normal playback speed with
SP recordings, and 21 times normal with EP recordings.

●

TimeScan will be automatically engaged during high-
speed search with an SP-recorded tape.

●

If the tape speed changes from SP to EP during high-
speed search the TimeScan mode will change to EP
search mode.

●

Press

TIME SCAN

for the opposite direction during

high-speed search of an EP-recorded tape to change
to 7x TimeScan search. (

pg. 38)

To resume normal playback, press

PLAY

High-Speed Search

PLAY

TIME SCAN

PAUSE

Содержание HR-S9500E












































































Результаты поиска

Содержание HR-S9500E

Отзывы:

Бренды по названию

Популярные бренды

JVC HR-S9500E, Инструкция по эксплуатации

Результаты поиска

Содержание HR-S9500E

Отзывы:

Бренды по названию

Популярные бренды