JVC HR-S3902/3912U, Инструкция по эксплуатации

Страница: 13 / 24

— 13 —
Page 13 February 8, 2003 6:12 pm
Express Timer Programing
Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
A
Press PROG. on the Remote to access the PlusCode No. screen.
B
Press START+/– once to access
Program screen.
Press
START+/– , STOP+/– , DATE+/– or
CH+/– repeatedly to enter the start
time, stop time, date or channel.
●
Press and hold START+/– or STOP+/–
to increase the time in 30-minute
intervals.
●
To set the tape speed, press SP/EP .
●
To timer-record daily (Monday–Friday) or weekly serials,
press
DAILY ( M-F ) ( Number key “8” ) or WEEKLY ( Number
key “9” ). Pressing the button again makes the “DAILY” or
“WEEKLY” display disappear.
●
If you are using a DBS receiver and
“DBS RECEIVER SET” is set to “ON”,
the band indication appears under
the channel number indication.
(Refer to “Cable Box and/or DBS
Receiver Control Setting” (
墌
pg. 7).)
TV: To timer-record a regular TV
broadcast received on the VCR.
CATV: To timer-record a cable TV broadcast received on the
VCR, or through a cable box (unless “CABLE BOX
SET” is set to “OFF”).
DBS: To timer-record a satellite broadcast received through
a DBS receiver.
If the channel number entered requires that the band be set
and “7=DBS” is displayed on the screen, press
DBS ( Number
key “7” ) to select “DBS”.
C
Press OK or PROG. .
●
If “PROGRAM NOT COMPLETED PROGRAM OVERLAP”
appears, see “Program overlap warning display” (
墌
pg. 14).
D
Press TIMER . The VCR turns off automatically and “
#
” is
displayed on the display panel.
24HR Quick Programing
You can program a timer recording that starts within 24 hours
using the JOG dial on the VCR.
Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.
A
Press 24HR QUICK PROGRAM on the VCR.
“
$
” starts blinking on the display panel.
B
Turn the JOG dial to the left or right to set
the start time.
●
One click stop of the JOG dial changes
the time in 5-minute intervals.
C
Push the JOG dial. “
䡬
” starts blinking on
the display panel. Turn the JOG dial to the
left or right to set the stop time.
●
To set the tape speed, press SP/EP . The
current setting for the tape speed appears
on the display panel for about 5 seconds.
Press
SP/EP again to change the setting
while tape speed is displayed.
D
Push the JOG dial. Turn the JOG dial to the
left or right to select the channel, then press 24HR QUICK
PROGRAM . The VCR turns off automatically and “
#
” is
displayed on the display panel.
NOTES:
●
If “Err” appears on the display panel, repeat the above steps
again.
●
When a menu screen is shown, you cannot use 24HR Quick
Programing function. Press
MENU to return to normal screen,
and try again.
●
You can use 24HR Quick Programing function also when the
VCR is turned off.
●
For 24HR Quick Programing function, the program overlap
warning display does not appear even if some programs overlap
each other.
To use the VCR while it is in timer recording standby
mode
Press TIMER , then press POWER
1
. After you use the VCR, press
TIMER again to put the VCR into timer recording standby mode.
Checking, canceling or changing program settings
A
Disengage timer
Press TIMER , then press POWER
1
.
●
When “AUTO TIMER” is set to “ON” (
墌
pg. 15), you do not
have to press TIMER .
B
Access Program Check screen
Press PROG. CHECK .
C
Access Program screen
Press PROG. CHECK again. Each time you
press PROG. CHECK , the next program’s
Program screen appears.
D
Cancel or change program setting
To cancel a program, press CANCEL when the Program screen
you do not want is shown.
To change a program, press the appropriate button: START+/– ,
STOP+/– , DATE+/– , CH+/– , DAILY ( M-F ) ( Number key “8” ),
WEEKLY ( Number key “9” ), and/or SP/EP when the Program
screen on which you want to make changes is shown.
E
Return to normal screen
Press PROG. CHECK repeatedly until no Program screen is
shown.
F
Reengage timer recording standby mode
Press TIMER . The VCR turns off automatically and “
#
” is
displayed on the display panel.
●
When “AUTO TIMER” is set to “ON” (
墌
pg. 15), the timer
recording standby mode automatically resumes when you turn
off the VCR.
PROGRAM 1
START STOP
– –:– –AM – –:– –AM
DATE CH
– –/– –/– – – – – SP
PRESS (+/ – , SP/EP, 8=DAILY
9=WEEKLY), THEN (0K)
PRESS (PROG.) TO END
PROGRAM 1
START STOP
8:00AM 9:00AM
DATE CH
12/24/03 110 SP
WED DBS
PRESS (+/ – , SP/EP, 8=DAILY
9=WEEKLY, 7=DBS), THEN (0K)
PRESS (PROG.) TO END
Start time
Stop time
Channel number
PRESS (CHECK) TO NEXT
PR START STOP CH DATE
1 8:00P 10:00 12 12/24
2 10:00A 10:45 40 12/25
3 11:30P 1:00 125 12/25
4
5
6
7
8
CONTINUED ON NEXT PAGE
HR-S3902U-EN-b.fm Page 13 Saturday, February 8, 2003 6:12 PM