JVC HR-J690EU, Инструкция по эксплуатации

Страница: 10 / 16

February 13, 2002 9:59 am Page 10
— 10 —
Master Page: Right
Checking, canceling or changing programme
settings
A
Disengage timer recording standby mode
Press
#
, then press
1
.
●
When “AUTO TIMER” is set to “ON” (
墌
12), press only
1
.
B
Access Program Check screen
Press
"
.
C
Access Program screen
Press
"
again. Each time you press
"
,
the next programme’s screen appears.
D
Cancel or change programme setting
To cancel a programme, press
&
.
To change a programme, press the
appropriate button: START+/– , STOP+/– ,
DATE+/– , DAILY ( number key “8” ), WEEKLY ( number key “9” ),
PR+/– , VPS/PDC ( number key “7” ) and/or SP/LP (
p
).
●
To change “TV PROG” to “SAT” for the channel position, press
the
number key “0” .
E
Return to normal screen
Press
"
repeatedly until no Program screen is shown.
F
Re-engage timer recording standby mode
Press
#
. The recorder turns off automatically and “
#
” is displayed
on the display panel.
●
When “AUTO TIMER” is set to “ON” (
墌
12), the timer
recording standby mode automatically resumes when you turn
off the recorder.
Automatic Satellite Programme Recording
You can automatically record a satellite programme which is
timer-programmed on your satellite receiver.
A
Connect a satellite receiver to the L-2 IN/DECODER connector
on the rear panel.
B
Set timer programme on satellite receiver referring to its
instruction manual.
C
Load a cassette with the record safety tab intact.
D
Set “L-2 SELECT” to “A/V” or “SAT”. (
墌
13)
E
To set the tape speed, press SP/LP (
p
). The current setting for
the tape speed appears on the display panel or the screen for
about 5 seconds. Press
SP/LP (
p
) again to change the setting
while tape speed is displayed.
F
Press SAT
#
for more than 2 seconds. The recorder turns off
automatically and enter the Automatic Satellite Programme
Recording mode (the SAT
#
indicator lights up). When signals
come into the recorder from the satellite receiver, the recorder
starts recording (the SAT
#
indicator blinks). The recorder stops
recording and turns off when signals stop coming in.
NOTES:
●
Be sure not to turn on the satellite receiver before the
programme starts broadcasting; otherwise, the recorder starts
recording when the satellite receiver is turned on.
●
To disengage the Automatic Satellite Programme Recording
mode, press
SAT
#
(the SAT
#
indicator goes off).
●
Depending on the type of satellite receiver, Automatic Satellite
Programme Recording may not be compatible.
●
B.E.S.T. does not work in the Automatic Satellite Programme
Recording mode.
●
Power Save mode does not work in the Automatic Satellite
Programme Recording mode.
●
Just Clock does not work in the Automatic Satellite Programme
Recording mode.
HR-J690EU-001EN.fm Page 10 Wednesday, February 13, 2002 9:59 AM