JVC HR-DVS2U, Инструкция по эксплуатации

Страница: 47 / 80

EN
47
When programmes overlap
each other
If "PROGRAM NOT COMPLETED PROGRAM OVERLAP"
appears, you have another programme overlapping the
programme you have just made.
The Program Check screen appears and conflicting programmes
will start blinking.
EX. Programme 1 (you have just made) and
Programme 4 overlap each other on the VHS deck.
CONFIRM OVERLAPPING
PROGRAMMES
1
Overlapping programmes blink on the screen.
SELECT PROGRAMME TO
MODIFY
2
Press
%fi
, then press OK or
#
.
●
You can only select one of the overlapping
programmes.
NOTE:
If you do not mind this overlap, press PROG to finish
the timer programme setting. See “ATTENTION” to the
right. Without doing anything for about 1 minute, the
VCR will finish the timer programing.
CANCEL OR CHANGE
PROGRAMME SETTING
3
To cancel a programme,
press CANCEL when the
Program screen you do not
want is shown. "PRO-
GRAM COMPLETED"
appears on the TV screen
for about 5 seconds, then
normal screen appears.
To change a programme,
press the appropriate button: START+/– , STOP+/– ,
DATE +/– , CH +/– and/or SP/EP ( ) when the
Program screen on which you want to make changes is
shown, then press
OK .
"PROGRAM COMPLETED" appears on the TV screen
for about 5 seconds, then normal screen appears.
NOTE:
If the overlap is not yet solved or another overlap
occurs with the timer programme setting after making
the last correction on a programme, the conflicting
programmes will be shown on the Program Check
screen again. Repeat the above steps again until the
overlap is solved.
NOTE:
If the programme you have just
made and "DV" are blinking,
there is a conflicting
programme on the DV deck.
1
Press
%fi
to move the
highlight bar to "DV", then
press
OK or
#
.
DV Programme Check
screen appears.
2
Cancel or change
programme setting as
described in step
2 and 3 in
the left column.
PROGRAM NOT COMPLETED
PROGRAM OVERLAP
10:00 11:00 12:00
ATTENTION
If there is a conflict in the timer schedule and one program
overlaps with another, only the parts shown below in gray
will be recorded.
Pattern 1: The program with the lower program number
will be recorded.
Pattern 2: The program that is broadcast earlier will be
recorded.
Pattern 3: The program that is broadcast earlier will be
recorded, followed by the remaining portion of
the other program.
CH10
CH40
Not recorded
Program 1
Program 2
10:00 11:00 12:00
CH10
Program 2
Not recorded
Program 1
CH40
10:00 11:00 12:00
CH10
CH40
Program 1
Program 2
Not recorded
VHS
PR START
STOP CH DATE
1 8:00P 11:00 12 12/24
2 10:00A 10:45 40 12/25
3 11:30P 1:00 125 12/25
4 9:00P 10:00 10 12/24
5
6
DV
(
5
,
∞
), THEN (
3
) (PROG.) : END
VHS PROGRAM 4
START STOP
9:00 PM
=
10:00PM
DATE CH
12/24/00 10 SP
SUN
PRESS (CANCEL) TO CANCEL
PRESS (OK) TO CONFIRM
PRESS (PROG.) TO END
VHS
PR START
STOP CH DATE
1 8:00P 11:00 12 12/24
2 10:00A 10:45 40 12/25
3 11:30P 1:00 125 12/25
4 9:00P 10:00 10 12/24
5
6
DV
(
5
,
∞
), THEN (
3
) (PROG.) : END
DV
PR START
STOP CH DATE
1 9:00P 10:00 12 12/24
2
3
4
5
6
VHS
(
5
,
∞
), THEN (
3
) (PROG.) : END