Timer Recording
EXAMPLE:
Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: EP).
When a TV is connected with an audio/video cable, turn the
TV and this VCR on and select the video input mode on the
TV.
NOTES:
• After timer recording is completed, the VCR turns off
automatically.
• You can program the timer recording while a regular
recording is in progress; the menu screens will not be
recorded.
• The timer recording will start at 5 seconds before the time
you predetermined.
Press
MENU
on the Remote.
Check the “TIMER REC SET”
option is selected, then press
ENTER
.
Press
SET –/+
to select one of
the program lines, then press
ENTER
.
Press
SET –/+
to select the
date, then press
ENTER
.
Set the start time, end time,
channel and tape speed as in
step 3.
NOTE:
To record from external
source, press
SET –/+
and set the channel to
"L". "L" will appear next
to CH 125 (or 69).
To enter other programs,
repeat step 2 through 4. Or,
press
MENU
twice to return
to the normal screen.
Press
TIMER
on the Remote.
The power will go off, the
TIMER indicator will light and
the VCR stands by for
recording.
To use the VCR while it is in timer recording standby mode
Press
TIMER
. After you use the VCR, press
TIMER
again
to put the VCR into timer recording standby mode.
1
2
3
4
5
6
Timer recording can be programmed on-screen with
the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1
month.
á+/-/ENTER/MENUñ
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
When setting the date in step 3 in the Setting the Timer
Recording section, press
SET –
repeatedly.
The setting changes as follows:
Example
Press
SET –/+
to select the
“TIMER REC SET” option in the
MENU. Then press
ENTER
to
display the timer program list.
Press
MENU
twice to return to
the normal screen.
TO CONFIRM THE SETTINGS
TO SET DAILY/WEEKLY TIMER
Press the
SET –/+
to select the
“TIMER REC SET” option in the
MENU. Then press
SET –/+
to
select the unnecessary program,
and press
CANCEL
to cancel the
program.
TO CANCEL A PROGRAM
When setting the Timer Recording, press
ENTER
until the
desired setting blinks, then re-enter the setting using
SET –/+
.
When finished, press
ENTER
.
NOTES: •
The VCR cannot be used while the TIMER indicator
is lit.
•
After a power failure or disconnection of the
power plug, all programmed recording settings
must be reset upon resumption of power. In this
case, reset the clock and reprogram any timer
recordings.
•
Press
CANCEL
to move cursor backward for
correction.
TO CORRECT THE SETTINGS
The current day (Friday)
SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
MO-FR (Monday to Friday)
WKL-WE
WKL-TH (Weekly Thursday)
(Weekly Wednesday)
One month later
minus one day
4F90401AE 08-Back
11/25/02, 03:02 PM
10
