1-2
Fig. D1
Fig. D3
Fig. D2
Fig. 1
Fig. 2
Fig. 3
Procedures for Lowering the Cassette holder assembly
As the mechanism of this unit is integrated with the Housing
assembly, the holder must be lowered and the two screws un-
screwed when removing the Mechanism assembly.
(S1a)
(S1a)
(S1b)
1
(S1b)
1
Bracket
Procedures for Lowering the Cassette holder assembly
(L2)
(L2)
2
<Note 2a>
<Note 2b>
2
(L2)
(S3)
b
CN3
CON3
(L3a)
(L3b)
(P3)
Roller arm
assy
Inertia plate
(L3c)
Cleaner assy
Not use
Not use
3
a
c
WR3a
Foil side
<Note 3>
(S3)
b
WR3b
Foil side
<Note 3>
Turn the loading motor pulley in the direction as indicated by
Fig.2. As both A and B levers are lodged twice, push the
levers in the direction as indicated by Fig.3 to release them.
When pushing the levers, do it in the order of A , B , B , A .
When the holder has been lowered, turn the pulley until the
cassette holder is securely in place without allowing any up/
down movement.
Note:
•
When installing the DRUM assembly, secure the screws
(S3) in the order of a , b , c .
