JVC HM-HDS1U, Инструкция по эксплуатации

Страница: 59 / 100

EN
59
SET TAPE SPEED
8
Press REC SPEED to set the tape speed. Each time the
button is pressed, the recording speed changes as
follows:
For HDD deck:
SP
=
LP
=
EP
=
SEP
=
SP
=
···
For VHS deck:
SP
=
EP
=
SP
=
···
SET WEEKLY OR DAILY
9
Press WEEKLY ( NUMBER “9”) for weekly serials or
DAILY(M-F) ( NUMBER “8”) for daily serials (Monday–
Friday).
●
When WEEKLY is selected in the HDD deck
recording, the recorder reserves certain space
corresponding to one-program-period, then writes
new data over the recorded data every week.
●
When DAILY(M-F) is selected in the HDD deck
recording, the unit reserves certain space
corresponding to five-programs-periods, then writes
new data over the recorded data everyday (from
Monday to Friday).
SET CATEGORY
10
1) Press
@#
(or
23
) to
move the arrow to
“CATEGORY”, then
press
OK . The
Category Set screen
appears.
2) Select the desired
category by pressing
@%#fi
(or
253∞
),
then press OK . The Program screen resumes.
RETURN TO NORMAL
SCREEN
11
Move the arrow to “CONFIRM” by pressing
@%#fi
(or
253∞
), then press OK . “PROGRAM COMPLETED”
appears on the screen for a while, then normal screen
appears.
• If there is a conflict in the timer schedule and one
program overlaps with another, the correction screen
will appear. In this case, correct the program data.
See page 61.
• If you select VHS deck, press TIMER . The recorder
turns off automatically and "
‰
" is displayed on the
display panel.
CATEGORY
SOAPS
RELIGIOUS
MOVIES
CHILDRENS
SPORTS
SERIES
MUSIC
CLASSICS
OTHERS
SHOPPING
MISC.
COMEDY DRAMA
SPECIAL
NEWS EDUCATIONS
RETURN
SELECT OK END
SELECT WITH [
∞523
]
THEN PRESS [OK]
INDEX
PROG.
SET CHANNEL NUMBER
7
Press CH +/– .
●
If you are using a DBS receiver, see “ATTENTION
FOR DBS RECEIVER USERS” on next page.
●
Holding down CH +/– rapidly scans through the
channels.
ATTENTION FOR DBS RECEIVER USERS
If you are using a DBS receiver (unless “DBS RECEIVER SET“
is set to “OFF”
墌
pg. 19), the BAND indication (TV or
CATV or DBS) appears under the channel number display. If
the channel number that has been entered requires that the
band be set, “7=DBS” is displayed on the screen. Press the
NUMBER key “7” to select the desired band.
a – TV : To timer-record a regular TV program received
on the recorder.
b – CATV : To timer-record a cable TV program received on
the recorder, or through a cable box (unless
“CABLE BOX SET” is set to “OFF”
墌
pg.16).
c – DBS : To timer-record a satellite program received
through a DBS receiver.
●
If “BAND” is set to “TV” at the Tuner Set screen (
墌
pg.13)
and “CABLE BOX SET” is set to “OFF” at the Cable Box
Set screen (
墌
pg. 16), CATV will not be displayed on the
Program screen; If “BAND” is set to “CATV” or “CABLE
BOX SET” is set to “ON”, TV will not be displayed.
NOTES:
●
To disengage the timer before recording starts, press TIMER
again. Pressing once more re-engages it.
●
In case of a power failure after programming, the recorder’s
memory backup keeps your selections for approximately 60
minutes.
●
Programs that start after midnight must have the next day’s date.
●
After timer recording is completed, the recorder’s power goes
off automatically.
●
You can program the timer while a regular recording is in
progress; the on-screen menu will not be recorded.
●
If the end of tape is reached during timer recording, the
cassette is automatically ejected.
●
When timer-recording cable or satellite channels through an
external tuner, be sure to keep the cable box or satellite
receiver's power ON.