JVC HD-Z56RX5, Инструкция по эксплуатации

Страница: 25 / 36

SET UP menu
23
LT-Z70/56RX5 / LCT1911-001A / English
ENGLISH
LANGUAGE
The LANGUAGE setting which was performed in the “Initial settings
(Setup tour)” (page 6) can be changed.
1 Choose LANGUAGE, then press the
a
or 3 button
A sub-menu of the LANGUAGE function appears.
2 Press the 6 buttons to choose a language. Then
press the
a
button
VIDEO-1 SETTING/VIDEO-3 SETTING
Set the VIDEO-1 SETTING or VIDEO-3 SETTING correctly
according to the video signal input from the external device connected
to the VIDEO-1 or VIDEO-3 terminal. If this setting is incorrect,
images will not be displayed.
VIDEO:
If a normal video signal (composite video signal) is input.
COMPONENT:
If a Component video signal (Y, Cb/Pb, Cr/Pr signals) is input.
• For detailed connecting methods, see “Additional preparation” on
page 24. This Television is compatible with the 1125i, 625p or
525p video signal only when the component video signal is input.
• When the input signal is 1125i, 625p or 525p, each signal type is
displayed at the upper right side on the TV screen by setting the
input to VIDEO-1 or VIDEO-3.
AI VOLUME
You can prevent the sudden increase or decrease of sound that occurs
when changing the channel to another channel.
ON:
This function is turned on.
OFF:
This function is turned off.
• The AI VOLUME function may not operate as expected if the
sound input level from a broadcast station is extremely low.
• This function does not work in the VIDEO mode.
TELETEXT LANGUAGE
There are four types of teletext language groups. Set the teletext
language group that corresponds to the language of the teletext
programme that you want to watch.
1 Choose TELETEXT LANGUAGE, then press the
a
or 3
button
2 Press the
6
buttons to choose a group
3 Press the
a
button to complete the setting
The menu disappears.
• Languages that are not included in the teletext language group
that you select will not be displayed properly in the sub-titles of
the teletext programme.
HDMI SETTING
This function is used if you have a DVI or HDMI compatible device
connected to your TV.
1 Press the 6 buttons and choose SIZE or AUDIO
• SIZE can only be chosen when the picture signal is VGA or
480p.
2 Press the 5 buttons and set SIZE or AUDIO
SIZE:
This option adjusts the position when a VGA or 480p picture
signal is being displayed on the screen. If the displayed picture is
slightly shifted, the position can be adjusted by choosing 1, 2 or
AUTO.
AUDIO:
Choose DIGITAL when only connecting with the HDMI cable.
Chose ANALOG when a DVI device is connected to the HDMI
terminal and the audio output terminal of the DVI device is
connected to the IN(HDMI AUDIO) terminal.
Choose AUTO when you want the TV to automatically select
DIGITAL or ANALOG.
LAMP TIMER RESET
See “LAMP TIMER RESET” on page 31.
LANGUAGE
Group Languages
GROUP-1 Turkish, Hungarian, English, German, French, Italian, Spanish,
Portuguese, Greek, Swedish, Finnish
GROUP-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian,
Hungarian, German, French, Italian, Swedish, Finnish
GROUP-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian,
Serbian, Croatian, Slovenian, Czech, Slovak, English, German
GROUP-4 Arabic, Czech, Slovak. Hungarian, English, German, French,
Italian, Spanish, Portuguese, Swedish, Finnish
OK
GROUP-1
> TELETEXT LANGUAGE
GROUP-2
GROUP-3
GROUP-4
HD-Z70&56RX5_Eng.book Page 23 Tuesday, October 11, 2005 9:17 PM