background image

7

4.  The television requires a lot of electrical power

It is recommended that the television is connected directly to the wall socket, and not to another 
device.  When connecting the television to a wall socket that is being used by another device, or 
when using an extension cord, be careful not to exceed the electrical capacity of the socket.

Do not turn the power on and off repeatedly in a short amount of time.

It subjects the television and the lamp to stress and may lead to malfunctions and the life of the 
lamp being shortened.

5.  The screen is made of plastic

Handle the screen very carefully as it can scratch easily.  Do not rub, hit or press on it with any 
hard objects.  When the screen is dirty, gently wipe it with a soft cloth.  Refer to the Appendix for 
details on how to clean the screen.

6.  Caution!  Warm air from the air ducts

This unit has an air duct for cooling.  The duct will blow warm air while the television is operating.  
When placing the television, make sure not to locate it too close to wallpaper.  The warm air 
could cause the color of the wallpaper to change.  Also, take care to keep children and pets 
away from the warm air ducts.  Long exposure to the warm air from the ducts could cause a 
minor burn.

7.  Caution!  Moving this television

When lifting this television, Do not hold by the screen frame.  Holding the screen frame could 
cause it to detach, causing the television to fall.

8.  Do not replace the lamp immediately after use

The lamp becomes extremely hot during use.  If the lamp is touched immediately after use 
before it has a chance to cool down, there is a danger of burns.  Be careful when handling the 
lamp.

9.  Do not touch the lamp glass

If the lamp is used when there is dirt from 

fi

 ngers on the lamp glass, there is a possibility of the 

lamp breaking.  Be careful not to touch the lamp glass.

10.  ILA element characteristics

Do not project still pictures or pictures that have still segments for a long period of time.  The still 
parts of the picture may remain on the screen.  This is a characteristic of ILA elements and not a 
malfunction.  The picture will disappear over time.

11.  Condensation

When a heater is turned on or the television is moved from a cold place to a hot place, droplets 
of water may form on the lamp and screen.  This is called condensation.  If the television is used 
while this condensation is still present, the picture may seem distorted, and the inside of the 
screen may become dirty.  In this case, wait until the condensation has gone before using the 
television.

12.  Do not open the rear cabinet of this television

This television has a DIGITAL-IN terminal.  Opening up the rear cabinet will violate the copyright 
of the program or software shown on the television.  Please do not open the rear cabinet.

13.  Usable Time

Do not keep the TV on for more than 24 hours consecutively.  There is a possibility of the life of 
the lamp being shortened.

Warnings

LCT2178 Eng.indd   7

LCT2178 Eng.indd   7

11/22/06   8:12:22 AM

11/22/06   8:12:22 AM

Содержание HD-P61R2

































































































Отзывы: