manualshive.com logo in svg

JVC HD-52G657, Руководство пользователя

Поделиться
Скачать
JVC HD-52G657 Скачать руководство пользователя страница 4

4

13)

  Unplug this apparatus during lightning storms or when unused for long periods of time.

14)

    Refer all servicing to qualified service personnel.  Servicing is required when the apparatus has 

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been 
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or 
moisture, does not operate normally, or has been dropped.

15)

   Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as 

vases, shall be placed on the apparatus.

16)

   Avoid improper installation and never position the unit where good ventilation is impossible. When 

installing this TV, distance recommendations must be maintained between the set and the wall, 
as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance 
guidelines shown for safe operation.

17)

   

Cautions for installation

       

— Do not tilt the TV towards the left or right, or towards the back.

       — Install the TV in a corner on the floor so as to keep cords out of the way.
       —  The TV will generate a slight amount of heat during operation. Ensure that sufficient space is 

available around the TV to allow satisfactory cooling.

18)

   Make enough room for inserting and removing the power plug.  Place the TV as close to the 

outlet as possible.  The main power supply for this TV is controlled by inserting or removing the 
power plug.

150 mm

200 mm

150 mm

200 mm

50 mm

LAMP

POWER

VOLUME

INPUT-4

CHANNEL

OPERATE

+

–

+

–

MENU

VIDEO

L/MONO

R

AUDIO

INPUT

CAUTION - 

These television models, HD-56G647 and HD-61G657 are for use only with JVC 

Model RK-CPRM7 stand. HD-52G657 is for use only with JVC Model RK-CPRS7 stand.   
HD-56G657 and HD-61G657 are for use only with JVC Model RK-CPTM7 stand.  Use with 
other stands is capable of resulting in instability causing possible injury.

LCT2061-001C-A ENG.indd   4

LCT2061-001C-A ENG.indd   4

12/15/06   10:48:11 AM

12/15/06   10:48:11 AM

Содержание HD-52G657

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды