JVC GZMC100 - Everio 2MP 4 GB Microdrive Camcorder, Инструкция по эксплуатации

Страница: 24 / 69

24
EN
BASIC OPERATIONS
1
Set the power switch to while pressing down the
lock button located on the switch.
2
Press MODE to select .
●
The camera is programmed to record voice on the medium
in the SD slot by the factory preset. To switch the recording
medium, see pages 26 and 27.
●
To change the sound quality and recording level, see pages
26 and 30.
3
Press the recording start/stop button to start recording.
4
To stop recording, press the recording start/stop button
again. The camera re-enters the record-standby mode.
NOTE:
For approximate recording time, see page 43.
Deleting Files
If you press during recording mode, the file recorded
most recently will be deleted.
●
However, if the recording mode (video, still image or voice) is
switched or the power is turned off and on again after
recording, you cannot delete the file.
1
Set the power switch to while pressing down the
lock button located on the switch.
2
Press MODE to select .
●
To change the playback speed, see pages 26 and 30.
●
To switch the medium to be played back, see pages 26 and
27.
3
Press
49
to start playback.
4
To pause playback, press
49
again.
To adjust the speaker volume
During playback slide the zoom lever towards T to turn up
the volume, or towards W to turn down the volume.
Playback Operations
High-Speed Search
Press
3
or
5
during playback.
Locating the start point of the file or skip the file
Press
2
or
6
during playback or pause mode.
Deleting Voice Files
Press , then press
rt
to select [EXECUTE] and press
49
.
●
You can select the desired file to be deleted by pressing
w
e
.
●
To delete multiple files at once, see pages 26 and 29.
Voice Recording
Power Switch
Lock Button
MODE
2 3
6 5
49
Zoom Lever
Recording Start/Stop
Button
Voice Playback