1
Charging the Battery Pack
1
Close the LCD monitor to turn off the
camcorder.
2
Attach the battery pack, then connect
battery pack, then connect
the AC adapter.
•
With the “
” (arrow) on the battery pack
pointing at the correct direction, slide the
battery pack until it locks in place.
•
Connect the power cord to the AC adapter,
Connect the power cord to the AC adapter,
and plug the power cord into an AC outlet.
•
The power/charge lamp blinks to indicate
charging has started.
•
When the lamp goes out, charging is
finished.
L
Required charging/recording time
(approx.)
*
When the LED light is off and
When the LED light is off and
the monitor backlight is set to [STANDARD]
mode.
Battery pack
Charging time
Recording time
BN-VF808U
(Provided)
1 hr. 50 min.
2 hr. 45 min.*
BN-VF815U
2 hr. 40 min.
5 hr. 25 min.*
BN-VF823U
3 hr. 40 min.
8 hr. 10 min.*
L
To detach the battery pack
NOTE
•
You can also use the camcorder with just
the AC adapter.
•
The actual recording time may shorten
depending on the recording environment,
such as when recording scenes with fast
moving.
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.
Necessary Settings before Use
AC Adapter
To AC Outlet
(110V to 240V)
Date/Time Setting
1
Open the LCD monitor to turn on the
camcorder.
2
Touch MENU.
3
Select [DISPLAY SETTINGS].
VIDEO
SELECT ASPECT RATIO
WIND CUT
DISPLAY SETTINGS
SET
QUIT
CONFIGURE ON-SCREEN DISPLAY
AUTO SWITCH REC MEDIA
4
Select [CLOCK ADJUST].
DISPLAY SETTINGS
9
:
;
B
LANGUAGE
DATE DISPLAY STYLE
CLOCK ADJUST
SET
QUIT
SET DATE AND TIME
MONITOR BRIGHT
Arrow
GZ-MS120_95EK_GB_EN.indb 16
8/3/2009 12:14:49 PM