1
ENGLISH
The camcorder is a microcomputer-controlled
device. External noise and interference (from
a TV, a radio, etc.) might prevent it from
functioning properly.
The.following.phenomena.are.not.
malfunctions.
•
The camcorder heats up when it is used
for a long time.
•
The battery heats up during charging.
•
When playing back a video file, the
image stops momentarily or the sound is
interrupted at junctions between scenes.
•
To solve the problem, first follow the
instructions below.
•
If the problem is not solved, reset the
camcorder. (
Z
below)
•
If the problem persists, please consult your
nearest JVC dealer.
L
.To.reset.the.camcorder
1) Close the LCD monitor to turn off the
camcorder and remove the power
supply (battery pack or AC adapter)
from the camcorder, then reattach it.
2) Select [FACTORY PRESET] from the
MENU.
Trouble
Action
Z
pg.
P
o
wer
No.power.is.supplied.
•
Connect the AC adapter securely.
•
Detach the battery pack once again and reattach it firmly.
•
Replace the dead battery with a fully charged one.
–
The.power.does.not.
turn.on,.or.the.battery.
operation.time.is.
extremely.short.even.
after.the.battery.is.fully.
charged.
•
Make sure to use the camcorder under appropriate
operating temperatures.
•
The battery is worn out and needs to be replaced. Please
purchase a new one.
–
The.power/charge.
lamp.on.the.camcorder.
does.not.light.during.
charging.
•
Charging may stop in places subject to extremely high/low
temperatures to protect the battery. It is recommended
to charge it in places with a temperature of 10°C to 35°C
(50°F to 95°F).
•
When the battery is already fully charged, the lamp does
not light. Check the remaining battery power.
–
Recor
ding
Recording.cannot.be.
performed.
•
SD card is full. Delete unnecessary files or replace the SD
card.
–
During.recording,.the.
date/time.does.not.
appear.
•
Touch the
DISP button once.
–
Digital.zoom.does.not.
work.
•
Change the settings in [ZOOM].
•
Digital zoom is not available in the still image recording
mode.
–
–
The.focus.is.not.
adjusted.automatically.
•
Set [FOCUS] to [AUTO].
•
Clean the lens and check the focus again.
–
The.continuous.
shooting.speed.is.slow.
•
The continuous shooting speed will drop after repeated
continuous shots, depending on the SD card or under
certain recording conditions.
–
Pla
ybac
k
Playback.cannot.be.
performed.
•
To watch images on a TV, set the TV’s input mode or
channel that is appropriate for video playback.
Other
.pr
ob
lems
If.you.cannot.upload.the.
file.to.YouTube™
•
Refer to “Latest Information”, “Updater”, “Troubleshooting”,
etc. in the help of PowerCinema NE for Everio.
–
Troubleshooting
FURTHER INFORMATION