64
EN
Warning Indications
The following indications appear on the screen.
Indication
Meaning
墌
(Battery indicator)
●
Displays the remaining battery power.
Remaining power level
●
As the battery power comes close to nil, the battery indicator
blinks. When the battery power is exhausted, power turns off
automatically.
–
–
SET DATE/TIME!
●
Appears when the date/time is not set.
●
Appears when the built-in clock (lithium) battery is discharged and
the previously set date/time is erased.
LENS CAP
●
Appears for 5 seconds after power is turned on with the power
switch set to
if the lens cap is attached or when it is dark.
–
PLEASE INSERT
MEMORY CARD!
●
Appears when there is no SD card inserted in the SD slot.
HARD DISK DRIVE IS
NOT FORMATTED
●
Appears when the built-in hard disk needs to be formatted.
THIS CARD IS NOT
FORMATTED
●
Appears when an unformatted SD card is inserted.
HDD ERROR!
MEMORY CARD
ERROR!
●
Appears when some errors occurred with the recording media.
●
Remove the card once and insert it again. If the error is not
cancelled, replace the card with one that has been guaranteed for
correct operation.
●
Perform clean up to restore the capacity of the recording media.
●
It is recommended to run check disk regularly on the PC,
providing that there is no data on the hard disk of the camera.
–
–
CHECK CARD’S WRITE
PROTECTION SWITCH
●
Appears when you attempt recording when the write/erase
protection tab on the SD card is set to the “LOCK” position.
NO VIDEO FILES STORED!
●
Appears if there are no video files when you attempt video
playback.
–
NO IMAGE FILES
STORED!
●
Appears if there are no still image files when you attempt still
image playback.
–
NO MEMORY CARD
●
Appears when the SD card is not inserted to the SD slot for file
copy/move operation.
–
NO SUPPORTED FILES
●
Appears when there are no JPEG (still image) files to be copied or
moved in recording media.
–
Exhausted
High
M6E6PAL.book Page 64 Monday, June 12, 2006 8:59 AM