JVC GZ-MG50US - Everio Camcorder - 1.33 MP, Руководство по обслуживанию

Страница: 11 / 17

(No.YF109)1-11
3.2.3 ASSEMBLY/DISASSEMBLY OF [13] MONITOR ASSEMBLY
z CAUTIONS
(1) Remove the MONITOR ASSEMBLY from the UPPER
CASE ASSEMBLY first, as they are removed together in
main parts disassembly, and then proceed to the
disassembly procedure.
(2) During the procedure, be careful in handling the LCD
MODULE and other parts. Pay special attention not to
damage or soil the monitor screen.If fingerprints are left
on the screen, wipe them with clean chamois leather or
a cleaning cloth.
(3) Since the BACKLIGHT is soldered to the BOARD AS-
SEMBLY (SD13), they should be removed together ex-
cept for the replacement.
z Removing MONITOR ASSEMBLY
(1) Turn the HINGE UNIT ASSEMBLY 90
°
, and remove the
three screws (1-3).Remove the MONITOR COVER AS-
SEMBLY by removing the three hooks (L13a-c).
(2) Pull out the U/D SWITCH BOARD from the MONITOR
CASE ASSEMBLY.
NOTE13a:
During the procedure, be careful in handling the FPC.
(3) Release the lock of the connector (CN13a,b), and re-
move the HINGE UNIT by lifting it up.
(4) Release the lock of the connector (CN13c,d), and pull
out the FPC.
(5) Remove the two screws (4,5), and Remove the MONI-
TOR BOARD ASSEMBLY by removing the hook (L13d).
(6) Remove the two hooks(L13e) and Remove the BACK
LIGHT.
(7) Remove the LCD MODULE.
(8) Remove the SHIELD CASE.
z Removing HINGE UNIT ASSEMBLY
(1) Remove the two screws (6,7), and Remove the HINGE
COVER(U,L).
NOTE13b:
During the procedure, be careful in handling the MAG-
NET.
Fig.3-2-4
BACK LIGHT
U/D SW
FPC
NOTE13a
LCD MODULE
S.CASE(LCD)
MONI.CASE
ASSY
MONI BOARD ASSY
MONI.COVER
ASSY
a
b
a
b
a
b
A
A A
LCD FPC
BL FPC
1
(S13a)
2
(S13a)
6
(S13b)
7
(S13b)
4
(S13c)
5
(S13c)
3
(S13b)
CN13b
CN13a
L13d
L13e
CN13d
CN13c
c
d
c
d
MAGNET
HINGE
COVER(U)
HINGE COVER(U)
HINGE UNIT ASSY
MAGNET
HINGE COVER(L)
NOTE13b
<NOTE13b>
<NOTE13a>
Marking in this side.
L13a
L13c
L13b