64
EN
Warning Indications (Continued)
Before cleaning, turn off the camera and remove the battery pack and AC adapter.
To clean the exterior
Wipe gently with a soft cloth. If the camera is particularly dirty, dip the cloth into diluted mild soap
and wring it out well before wiping. Then wipe again with a dry cloth.
To clean the LCD monitor
Wipe gently with a soft cloth. Be careful not to damage the monitor.
To clean the lens
Wipe gently with lens cleaning paper.
Indication
Meaning
墌
RECORDING FAILURE
●
Performance of recording medium is poor. Use the
Cleanup function [CLEAN UP] in the menu.
●
The writing speed of recording medium is slow, or the
recording medium is corrupted. Use an SD card that is
guaranteed to operate.
●
The recording medium was subjected to vibrations or jolts.
Be careful not to subject the recording medium to
vibrations or jolts.
●
Appears when the built-in hard disk is full and recording is
not possible. Delete unnecessary files.
●
Appears when the SD card is full and recording is not
possible.
Replace with new recording medium or delete
unnecessary files.
–
RECORDING MAY NOT BE
CORRECT ON THE MEMORY
CARD
●
The data may not be recorded on the recording medium
correctly. Try recording again.
●
Otherwise, clean up the recording medium.
–
MEMORY CARD CANNOT BE
PLAYED BACK CORRECTLY
●
The recording medium cannot be played back correctly. Try
playback again.
–
CANNOT USE IN VIDEO MODE
●
The operation is not available in the video mode.
–
DROP DETECTION WORKED
AND THE POWER IS TURNED
OFF
●
The drop detection function operated, and the power was
turned off. The file that was being recorded may have been
saved into the [EXTMOV] folder.
Cleaning the Camera
NOTES:
●
Avoid using strong cleaning agents such as benzine or alcohol.
●
Cleaning should be done only after the battery pack has been removed or other power units have been
disconnected.
●
Mould may form if the lens is left dirty.
●
When using a cleaner or chemically treated cloth, refer to the cautions for each product.
M6E3Asia.book Page 64 Monday, March 13, 2006 3:03 PM