IEEE 1394 (Firewire) input/output
compatible with most NLE systems
System
application
Full CCU control
RM-P210 camera remote controller
GY-DV550E
DV (IEEE1394) connector
DV Interface
BR-DV600E
NLE
Camera control
Camera remote controller
(RM-P210)
GY-DV550E
Portable recorder
Backup recording
26-pin
camera cable
The GY-DV550E is the industry’s first DV camcorder to offer
full CCU control (including Iso-Cam operation), allowing you
to use it as the base for a full-fledged studio system.
●
Allows remote operation of the GY-DV550E camcorder
from a distance of up to
100 meters (328 ft.)
●
Accepts JVC or Sony 26-pin CCU cables when used in
combination with the GY-DV550E
●
Full access to camera menus, function controls and camera
setup parameters
●
Dynamic or carbon equivalent RTS/2-wire compatible intercom
●
Front panel built-in genlock controls
●
Serial data communications for more reliable and accurate
communications between the camera and RCU
●
Multiple outputs (R/G/B component for computer graphics and
keying, plus Y/R-Y/B-Y component for system or Y/C358 for
S-VHS)
●
Gain select switch with variable gain function
●
4 programmable function buttons for quick access to menu items
●
LCD read out at the base station for easy menu navigation and
simple operation
This allows high-quality compressed digital video signal
transfer directly to a computer, a non-linear editing
system, or to another DV recorder. Producers can now
digitally spool directly to a non-linear editing platform
without loss, and then transfer the finished product
directly back to video tape using the camera alone.
Using the 26-pin camera cable, you can connect the GY-
DV550E to a portable recorder for backup in the
field or to a camera remote controller for use in
studio.
Maximum transmission distance
Attached VF
RM-P200
RM-P210
RM-P300
GY-DV550E
VF-P115 (1.5 inches) 100 m (328 ft) 100 m (328 ft) 300 m (656 ft)
VF-P400 (4 inches)
100 m (328 ft) 100 m (328 ft) 300 m (656 ft)
*1 Iso-Cam capability is not available when the VF-P400 is used. This capability is available using a standard local power supply.
*2 Iso-Cam capability is not available when the transmission distance exceeds 200 m.
This capability is available using a standard local power supply.
Internal adjustment is required depending on the transmission distance. Please contact your JVC dealer for details.
Connectable CCUs
*
1
*
2
