© 2016 JVC KENWOOD Corporation
B5A-1637-00
2
Items added to menu item [Live Streaming Set]
The following items are added to [System]
→
[Network]/[Settings]
→
[Live Streaming Set]
→
[Streaming Server]
→
[Server1]/[Server2]/
[Server3]/[Server4].
●
Destination URL
For entering the URL of the live distribution destination beginning
with “rtmp://” in the destination URL.
There is no default value (blank).
* You can enter up to 191 characters and ASCII characters.
●
Stream Key
Enter the stream key specified at the live transmission destination.
There is no default value (blank).
* Enter not more than 63 characters.
●
Adaptive Bit Rate
If “On” is selected, the bit rate is changed automatically according to
changes in the network bandwidth.
This bit rate is limited by the value set for the bit rate setting item
during live streaming.
[Setting Values: On,
Off]
Memo :
●
Adaptive bit rate setting is possible only when [Type] is set to “ZIXI” and
[Latency] is set to either “Medium” or “Low”.
●
PCR Jitter
Setting to “Low” reduces the PCR jitter of live streaming. [Setting
Values:
●
Normal, Low]
●
SMPTE 2022-1 FEC
Set to “On” to use FEC (Forward Error Correction). This is a
transmission system that recovers the missing packets in the
decoding process without having to retransmit the missing packets.
[Setting Values: On,
●
Off]
●
FEC matrix
Set the amount of “FEC” (Forward Error Correction) overhead for
configuring [SMPTE 2022-1].
Memo :
●
This item is selectable only when [Type] is set to “MPEG2-TS/UDP”.
Setting value added to menu item [Latency]
“High” is added to [System]
→
[Network]/[Settings]
→
[Live Streaming
Set]
→
[Server]/[Streaming Server]
→
[Server1] to [Server4]
→
[Latency].
Also, “Minimum (ZIXI Off)” is added to [Latency] when [System]
→
[Network]/[Settings]
→
[Live Streaming Set]
→
[Streaming Server]
→
[Server1]/[Server2]/[Server3]/[Server4] is set to “ZIXI”.
[Setting Values: High, Medium,
Low, Minimum (ZIXI Off)]
Zixi information added and operation change in the
Status (Network) screen
The following items are added to the Status (Network) screen when
[Live Streaming Set] is set to “ZIXI”.
●
Uptime
●
Total
●
Recovered
●
Not Recovered
●
Bit Rate
In addition, pressing the “Menu” button while the Status (Network)
screen is displayed will display the “Network Settings” screen.
Memo :
●
“Bit Rate” is displayed only when [System]
→
[Network]/[Settings]
→
[Live Streaming Set]
→
[Streaming Server]
→
[Server1]/[Server2]/
[Server3]/[Server4] B [Type] is set to “ZIXI” and [Adaptive Bit Rate] is
set to “On”.
FTP resume feature added
When FTP transfer starts and there is a file of the same name on the
server with a file size smaller than the file to be transferred, the file on
the server will be regarded as an interrupted file during a FTP transfer.
A confirmation screen to resume transfer (append writing) appears.
If “Resume” is selected, FTP transfer is carried out such that it appends
from the position where it was interrupted.
When FTP transfer ends normally, “Successfully Completed.” appears
on the screen.
Memo :
●
FTP server equipped with resume function is required.
●
If [System]
→
[Network]/[Settings]
→
[Clip Server]
→
[Clip-FTP1]/[Clip-
FTP2]/[Clip-FTP3]/[Clip-FTP4]
→
[Protocol] is set to “SFTP”, the
“Resume” function is disabled.
●
If “HTTP” is selected in the [Select FTP Proxy] screen of the network
connection setting, the resume function is disabled.
Setting value “ZIXI” added to menu item [Protocol]
“ZIXI” is added to [System]
→
[Network]/[Settings]
→
[Clip Server]
→
[Clip-FTP1/2/3/4]
→
[Protocol].
If “ZIXI” is selected, [Username] in [System]
→
[Network]/[Settings]
→
[Clip Server]
→
[Clip-FTP1/2/3/4] changes to [Stream ID]. [Setting
Values:
●
FTP, SFTP, FTPS, FTPES, ZIXI]
Memo :
●
To use the “ZIXI” setting, a dedicated server is needed separately.
●
If “ZIXI” is set, the “Resume” function is enabled.
File format setting value added to MXF(MPEG2)
definition
If “MXF(MPEG2)” is selected in [System]
→
[Record Set]
→
[Record
Format]
→
[
W
Format], “1280x720” can be selected from the [
W
Resolution] setting values. You can also select 60p (HQ) or 50p (HQ)
for [
W
Frame Rate / Bit Rate].
Memo :
●
For GY-HM850 series, the option is fixed under the following conditions.
When 60/30/24 is selected in [System]
→
[System Frequency], [
W
Frame Rate / Bit Rate] is fixed at 60p (HQ).
When 50/25 is selected in [System]
→
[System Frequency], [
W
Frame
Rate / Bit Rate] is fixed at 50p (HQ).
Language (Turkish) support added * E model only
“
” is added to [System]
B
[Language].
Türkçe
Importer (EU only)
12 Prie
s
tley W
a
y, London NW2 7BA, UNITED KINGDOM
Importeur (Nur EU)
Konr
a
d-Aden
au
er-Allee 1-11, 6111
8
B
a
d Vil
b
el, DEUT
S
CHLAND
Importateur (EU uniquement)
7 Allee de
s
B
a
r
ba
nnier
s
, C
S
200
3
4 926
3
2 Gennevillier
s
Cédex, FRANCE
Importatore (
S
olo EU)
Vi
a
G.
S
irtori 7/9, 20129 Mil
a
no, ITALIA
Importador (
S
olamente EU)
Ctr
a
. R
ub
i,
88
Edifi cio C
a
n C
as
t
a
nyer, 0
8
174
Sa
nt C
u
g
a
t del V
a
lle
s
,
B
a
rcelon
a
, E
S
PAÑA
Importeur (Alleen EU)
Le
u
ven
s
e
s
teenweg 24
8
J, 1
8
00 Vilvoorde, BELGIQUE
Importeur (Alleen EU)
Am
s
terd
a
m
s
eweg
3
7, 1422 AC Uithoorn, NEDERLAND
Manufacturer
3
-12, Moriy
a
-cho, K
a
n
a
g
a
w
a
-k
u
, Yokoh
a
m
a
-
s
hi, K
a
n
a
g
a
w
a
, 221-0022,
JAPAN
GY-HM850Sheet3_EN.fm 2 ページ ２０１６年５月２３日 月曜日 午後５時２２分
