EN
7
QUICK OPERATION GUIDE (D.S.C.)
A
B
2
1
3
3
1
2
4
Using the battery pack
Hook its end to the camcorder
and push the
battery pack in until it locks in place
.
(Charging procedure,
Z
pg. 10)
To remove the battery pack
Slide BATTERY RELEASE and pull out the battery
pack.
1
Set the System Select Switch to “D.S.C.”.
2
Set the Power Switch to “PLAY”.
— A still image stored in memory appears.
3
Press
2
/PAGE – or
3
/PAGE + to select the
still image you want to view.
(For more details,
Z
pg. 44.)
•The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
•The LCD monitor turns on/off when it is
opened/closed at approx. 60 degrees.
1
Turn the LENS COVER Open/Close Ring to
open the lens cover.
2
Set the System Select Switch to “D.S.C.”.
3
Set the Power Switch to “AUTO” or “PRO.”.
— The power lamp will light and an image
will appear.
4
Press the SNAPSHOT Button.
— A still image is shot and is stored in the
camcorder’s memory.
(For more details,
Z
pgs. 20 – 22)
•The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 60 degrees.
•The LCD monitor turns on/off when it is
opened/closed at approx. 60 degrees.
SUPPLY POWER
PLAYBACK
SHOOTING
Set to “PLAY”.
Hook on.
Push in.
BATTERY RELEASE
LENS COVER
Open/Close Ring
Set to “AUTO”
or “PRO.”.
Set to “D.S.C.”.
Next/Previous Page
(
2
/PAGE – or
3
/PAGE +) Buttons
Set to “D.S.C.”.
SNAPSHOT Button
A still image you shoot is stored in the camcorder's built-in memory.
