manualshive.com logo in svg

JVC GR-SXM515, Инструкция по эксплуатации, Страница: 20 / 68

Поделиться
Скачать
JVC GR-SXM515 Скачать руководство пользователя страница 20

20

 EN

RECORDING

  Basic Recording (cont.)

Shooting While Watching The LCD Monitor

Before the following steps, perform step 1 (

Z

 pg. 18).

2

ENTER RECORD–STANDBY MODE

Make sure the LCD monitor is fully open. Turn the
LENS COVER Open/Close Ring to open the lens
cover, then set the Power Switch to “CAMERA”
(“AUTO” or “PRO.”).

•The power lamp lights and the camcorder enters the

Record-Standby mode.

•The scene you are aimed at appears in the LCD

monitor, with the word “PAUSE” superimposed
upon it.

3

START SHOOTING

Tilt the LCD monitor upward/downward for best
viewability (

Z

 pg. 21) and press the Recording Start/

Stop Button.

•“

” appears in the LCD monitor while recording

is in progress.

4

STOP RECORDING

Press the Recording Start/Stop Button again to stop
recording.

•The camcorder re-enters the Record-Standby mode.

NOTES:

●

When you use the LCD monitor outdoors in direct
sunlight, the LCD monitor may be difficult to see. If this
happens, we recommend that you use the viewfinder
(

Z

 pg. 18).

●

To turn the tally lamp off during recording, refer to pgs.
32 and 34.

●

For other notes, refer to pg. 19.

180

°

90

°

LENS COVER Open/Close Ring

Power Switch

Recording Start/Stop Button

Power lamp

Tally lamp
(lights while recording is in progress)

Содержание GR-SXM515





































































Отзывы:

Нет отзывов